Wondering what finally resolved your issues....my car seems to use 02's every so often...i have bbk long tube headers....codes are either 02 heater related or the 2195 and 2197 codes....read alot And also been told that it could be 02 sensor positioning being to far from the oem positioning, bad angle, meaning not pointed downward like the oem position...to close to a particular chamber and not far enough back to where all chambers merge...alot of this and that...when looking at my bbk's the sensors are positioned about 2 inches after the chambers meet in the collector on a relatively flat non angle...i had extensions previously and when i went through my first set i removed them and found that the 02's can infact reach without the extensions....a few months passed problem free and last week it came up again...so about to swap in another set of sensors and just wondering if their is a descent solution other then going back to stock headers or having to remove and modify my existing headers...just dont wanna have 02 sensor issues especially now that im in the midst of putting a paxton kit on....any suggestion or solutions from those that have or had this problem and were able to correct it would be great...appreciate any info/insight...
Last edited: