there ok. ima lower the rear more. oneday. lol
I'm looking to go the opposite route. My car came with Eibach Pro springs but I'm planning on using 4cyl front springs and looking for a pair of stock coupe springs for the rear.
there ok. ima lower the rear more. oneday. lol
If you want a 10.5 rear wheel fox axle will work the best. The sn95 axles are wider. I run 315 35 17 nitto on a 10.5 with fox lenght axles. I roll the fenders, hammer the inner fender and moved the tailpipes closer to the gas tank.
Thanks for the info. I appreciate it. I don't imagine it can be done without rolling the fenders huh? Also, what size front wheels do you run?
The fronts are 17 x 9 and the tires are 245 x 40 x 17. I used 94 spindles.
I'll try to get some pics of the rear, but I don't think the tires would fit without rolling the lip. I had 275 40 on the 10.5 rim but the tire looked small on the rim. The lip was not rolled when I had that 275 on.
Nice. I've been looking for some info from someone running 9 inch wide on the front. In addition to the 94 spindles, what brakes are you running, what backspace are the wheels, is the car lowered, do you have a stock K member, any other mods needed to make them fit?
I appreciate any info you can provide. Thanks!
My car is a 90, but I thought the fenders changed in 91 to make room for the 16'' pony wheels.