another before springs:
Can you pull a measurement from the ground to the fender? I would like to see if it is any lower than my current ride height before I do all the work to put these in my car.
Mine is around 26 1/2 in the back and 26 in the front.
Front:
Back:
Thanks
that looks normal. Get an alignment, it should help.
Here's a pic of mine with the ss springs and poly isos on all 4 corners.
Yup, those last two pics confirm it... 100% as expected normal.
Kudos to H&R for their consistency!
No problem found.
Are you sure you have the correct springs in the front and the back? It's easy to get the them swapped around. :shrug:I just installled the H&R Sport Springs on my 2003 Cobra and Im having the same problem. My rear dropped about 1.5 - 2 inches compared to my front only dropping about 1/2 - 3/4 of an inch. Its almost a reversed look for what I was going for. I called H&R and they claim that there is no settling involved with their springs and once theyre installed thats the way they look. Im not happy with the stance at all. Their estimated mesasurements were off by a a lot! They look nothing like the pictures that I saw of just H&R SS springs installed and nothing else. What should I do?