Everyone,
Just figured I'd throw some web-kudos up for Eric Brooks and the recent remote tuning session he did with me to get my 2.2 Kenne Bell Cobra dialed in. I'm up in Montana with no reputable tuner/dyno within any reasonable distance, so I decided to do some research into remote tuning and Eric had gotten very good reviews. After getting the blower installed and the AFX A/F gauge (with the NTK sensor) Eric sent me a base tune and we got started. It only took 5 exchanges back and forth between me and Eric, logging the idle, some part throttle driving, and a few WOT runs, and he has it dialed in and running great. Overall, I went from no tune at all to fully tuned and ready to rock within a week, the longest time it took him to get a revised tune file back to me was about 18 hours or so. I'm only running about 15psi with a 2.76 upper (4000 ft elevation sucks) but it definitely pulls way harder than my ported eaton setup did. Anyway, long story short, if anyone is looking into some serious mods but can't find a tuner nearby, I suggest you look up Brooks Speed and I wouldn't hesitate to use his remote tuning service again!
Just figured I'd throw some web-kudos up for Eric Brooks and the recent remote tuning session he did with me to get my 2.2 Kenne Bell Cobra dialed in. I'm up in Montana with no reputable tuner/dyno within any reasonable distance, so I decided to do some research into remote tuning and Eric had gotten very good reviews. After getting the blower installed and the AFX A/F gauge (with the NTK sensor) Eric sent me a base tune and we got started. It only took 5 exchanges back and forth between me and Eric, logging the idle, some part throttle driving, and a few WOT runs, and he has it dialed in and running great. Overall, I went from no tune at all to fully tuned and ready to rock within a week, the longest time it took him to get a revised tune file back to me was about 18 hours or so. I'm only running about 15psi with a 2.76 upper (4000 ft elevation sucks) but it definitely pulls way harder than my ported eaton setup did. Anyway, long story short, if anyone is looking into some serious mods but can't find a tuner nearby, I suggest you look up Brooks Speed and I wouldn't hesitate to use his remote tuning service again!