Def post back what you find!
Well, looks like the motor is coming BACK OUT. The couldnt get it tuned either but the noticed my intake temps were around 180 degrees at idle. The said they are 99% sure that the problem is the cams. The think they may have been ground wrong and it is creating excessive valve overlap. So I am just putting the stock ones back in and eliminating that possibility and wipping my hands clean from them. They are gonna have them spin schecked to see if they are out and if they are I'm taking them straight back to comp to get my money back. On a positive side, I am getting really good at taking my motor out. Had it out in 4 hours.
On a positive side, I am getting really good at taking my motor out. Had it out in 4 hours.
so the cams ran good for the dyno pulls and then went to shit??? trying to wrap my head around that
Slow Poke
I have checked the coil circuits and they were good. I did a leak down test again with the cams out and it was good. I got the stock cams back in and the motor back in the car. I gotta work this weekend so I will have everything finished up on Monday. I will post how it does when I finish. I also took the comp cams back and the are checking them for me. Hopefully I will hear back from them on Monday.
THE CAR IS FIXED!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Huge shout out to Dynospeed Racing here in Memphis and to 04cobra85 for all his help. I put the factory cams back in it and it runs its A$$ off now. So I guess the cam lobes were off. I am still waiting to hear back from comp cams about that. I am taking it back to Dynospeed this thursday for a retune.
THE CAR IS FIXED!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Huge shout out to Dynospeed Racing here in Memphis and to 04cobra85 for all his help. I put the factory cams back in it and it runs its A$$ off now. So I guess the cam lobes were off. I am still waiting to hear back from comp cams about that. I am taking it back to Dynospeed this thursday for a retune.
I was meaning more to ensure they have the same issue, not sure if it would hold weight with COMP.They are gonna be paper weights. I'm not gonna sell them and then someone else have the same problem. They are just garbage to me