5.0 Fox vs 97 Cobra.. Who wins?

[mr2cam]

True, but all his weight also transfers to the rear tires... Are Mr2's RWD????

Yes they are RWD

 

[mr2cam]

Well the weather is getting better here but the fox is having transmission issues so that race may be delayed. I asked the SRT4 guy to race tonight but he didn't respond, I just bought a standalone for my car and finally got around to tuning with it, here is a video of a 2nd-3rd gear pull at 16psi, should be roughly about 320rwhp I think. It is still a little cold out (about 38 degrees) and thats why I spun right at the top of 2nd.

[ame=http://www.youtube.com/watch?v=yn7mzl3KaIY]YouTube - 2ndgearpull[/ame]

 

[Dusten]

i wouldnt call it issues, i'll have it sorted out saturday morning.

 

[Stopsign32v]

Damn that was slow

 

[Dusten]

Damn that was slow

arent most cars with only 320rwhp?

that was 16psi. at 17psi he ran a 12.01 and at 20 psi he ran 11.55
pretty big jump for a few psi. his turbo is out of its maps at 16psi, he needs to be running it closer to 23-25

 

[mr2cam]

arent most cars with only 320rwhp?

that was 16psi. at 17psi he ran a 12.01 and at 20 psi he ran 11.55
pretty big jump for a few psi. his turbo is out of its maps at 16psi, he needs to be running it closer to 23-25

and for 23-25 im gonna need some more fuel

 

[ModularSpeed]

Well the weather is getting better here but the fox is having transmission issues so that race may be delayed. I asked the SRT4 guy to race tonight but he didn't respond, I just bought a standalone for my car and finally got around to tuning with it, here is a video of a 2nd-3rd gear pull at 16psi, should be roughly about 320rwhp I think. It is still a little cold out (about 38 degrees) and thats why I spun right at the top of 2nd.

YouTube - 2ndgearpull

Pretty strong 2nd gear man!:beer:

 

[Dusten]

trans is coming out. Won't see the race till mid february now. Motor and trans are both coming out.
Motor will be a .030" 302 with GT40 heads explorer intake and E cam.

 

[mr2cam]

Pretty strong 2nd gear man!:beer:

Thanks dude :beer:

 

[Stopsign32v]

Motor will be a .030" 302 with GT40 heads explorer intake and E cam.

Should make 320rwhp. I'd suggest going with some compression since you are replacing the pistons. Look into a better cam and intake also.

 

[mr2cam]

Should make 320rwhp. I'd suggest going with some compression since you are replacing the pistons. Look into a better cam and intake also.

Ooo if he makes that kind of rwhp that would be an awesome race for me at 16psi on pump gas, bring it Dusten :beer:

 

[Dusten]

Should make 320rwhp. I'd suggest going with some compression since you are replacing the pistons. Look into a better cam and intake also.

I already have the intake and the cam, i've had them for a while. Its just a temp motor, so i am not spending any real money on it.

Ooo if he makes that kind of rwhp that would be an awesome race for me at 16psi on pump gas, bring it Dusten :beer:

if its broke in before i leave.

 

[mr2cam]

I already have the intake and the cam, i've had them for a while. Its just a temp motor, so i am not spending any real money on it.


if its broke in before i leave.

pssh broke in, you know how to break in a motor

 

[Stopsign32v]

I already have the intake and the cam, i've had them for a while. Its just a temp motor, so i am not spending any real money on it.

Well atleast go with some good compression. I'd go with 10.5-11.1 if I were you.

 

[Dusten]

Well atleast go with some good compression. I'd go with 10.5-11.1 if I were you.

already had the stock pistons. the motor is just to make the car reliable. nothing more.

 

[Dusten]

well, the car is up and running, and pretty slow if you ask me...
oh well, lets race chris
[ame=http://www.youtube.com/watch?v=yrxO3Lm3PVA&feature=channel_page]YouTube - exhaust clip[/ame]

thats a third gear pull.

run down on the new motor
Explorer intake
GT-40 heads with stock valves, 3 angle job and TFS valve springs
stock bottom end, bored .030, E-cam
24lb injectors, 65mm tb, 73mm maf, bbk cai, mac short tubes, OR h-pipe, 2.5" exhaust.

 

[mr2cam]

well, the car is up and running, and pretty slow if you ask me...
oh well, lets race chris
YouTube - exhaust clip

thats a third gear pull.

run down on the new motor
Explorer intake
GT-40 heads with stock valves, 3 angle job and TFS valve springs
stock bottom end, bored .030, E-cam
24lb injectors, 65mm tb, 73mm maf, bbk cai, mac short tubes, OR h-pipe, 2.5" exhaust.

You should beat chris but I think you will go down to the sushi sled

 

[Dusten]

You should beat chris but I think you will go down to the sushi sled

it runs 11's on a built motor and aftermarket turbo/cams/stand alone... i ****ing hope.
but, i could always roll out the tiller... race from a roll?

 

[mr2cam]

it runs 11's on a built motor and aftermarket turbo/cams/stand alone... i ****ing hope.
but, i could always roll out the tiller... race from a roll?

I'll run you on the lowest boost setting against your fox, and I told you that I would race you on your tiller with me at 26psi once I get my meth installed but you said you didn't want to get your bike ready just to race me. I was trapping only 3mph slower then you in the 1/8th last year with a lot less hp then this year .

 

[97cobraheaven]

well, the car is up and running, and pretty slow if you ask me...
oh well, lets race chris
YouTube - exhaust clip

thats a third gear pull.

run down on the new motor
Explorer intake
GT-40 heads with stock valves, 3 angle job and TFS valve springs
stock bottom end, bored .030, E-cam
24lb injectors, 65mm tb, 73mm maf, bbk cai, mac short tubes, OR h-pipe, 2.5" exhaust.

So you used stock pistons on a .030 over block?