Recent content by seths99cobra

Im parting ways with my black 99 coupe cobra with tan interior. car has 111xxx miles. has factory wheels that are painted black. front and rear lights all have been blacked out with black tinted clear coat and shine like they are not tinted. has a 03/04 front bumper with some scuffs that could...

i have a complete a/c system out of my 99 cobra in perfect working condition when pulled from car. a/c compressor a/c condensor all lines $150 plus shipping

I have a complete Vortech kit for 99-04 cobras and mach 1s. this kit came off a mach 1 which i bought from chance5.0 on here 2 years ago and i put on my 99 cobra. i installed it on my car last year and sent the car to a shop to only have them tear the engine down and then close up shop and i...

I have a few questions about tuning my car now that I have alot more mods. I'm running a v3, along with two aeromotive pumps with -8an feed line and -6an return line and 80lbs injectors. Since I'm running a return style setup do I need to keep the evap system? I ask this because the new lines...

Thinking about swapping in a automatic trans from a 4.6 police interceptor. Mmy question is can just swap everything over and go or do I need to tune the ecu for an auto? Any help would be appreciated

im having trouble finding the correct main bearings for my 99 teskid block. ive tried two clevite part numbers and no luck. ive tried two sealed powered bearings and a king bearing from summit and that set was all screwed up three different main bearing in the same packing. are the 99 teskid...

I got a return style fuel system that I need to wire into a returnless system car. This is what I have far as wiring goes. A 2guage power wire, inline fuse, 4 pin 30amp relay, two 14/16 guage hot wires and a ground wire. At the end of the 2guage wire is a fuse panel with one fuse. I have a...

anyone got any reviews on them and there pistons? any info would be good gettin ready to order some from them. how well do they hold up? thanks guys

im gettin ready to start ordering parts for my turbo build and im lookin for some forged pistons with a factory bore size and a dish between -11cc to -18cc. i could only find +sized cc pistons on sights like summitracing. i dont want to spend a fortune on them. ive seen the ones i need on mmr...

hey guys have any of you heard of hpp racing turbo kits? good, decent, ok dont buy? thanks guys