Search results

Like to know if it's worth getting heads ported Im running aggressive racing cams and nitrous. heard that you get more horsepower and RPMs out of it you can buy kits online do it yourself or send it to professionals and spend $1,000 getting it done what is worth it. Sent from my CLT-L04...

I need some help to figure out what size bearing is this I had purchased this engine block from a sports shop it came into a crate I don't know if it's brand new or it was a core that got rebuilt now I'm just changing the internal so I can put some nitrous in it like to know the bearing size is...

hi debating on deleting the EGR is it worth it. my reason is i dint like the vacuum lines running all over the place and is there more then just capping of the intake and manifold. any advantage doing it. will it affect the idle or gain anything out of it.

Please guys give me a some input. If I swap my stock rods with some replacement H-beam rods like to put more nitrous. do I have to get the crank balance do I have to change anything else or can I just swap the rods and put new bearings. And I'm done. Sent from my CLT-L04 using the...

looking for a vortech head unit that would fit 2003 mach 1 or a paxton i was told it would fit on the vortech bracket. if anyone knows someone or have one for sale PM please. thanks.. Sent from my SM-G935W8 using the svtperformance.com mobile app

looking for a vortech head unit that would fit 2003 mach 1 or a paxton i was told it would fit on the vortech bracket. if anyone knows someone or have one for sale PM please. thanks..

My mechanic wont Installing my 106200 comp cams is telling me that the valve could it the piston is that true..

i need some good advice before tuning my car i have 106200 comp cams and this is what comp cams quote to up grade with the 106200 cams DOHC: Street & Strip performance. Needs lower gears, exhaust upgrades, larger throttle body and mass air, bigger fuel injectors and a 2200+ stall with...

this is the third time i swap cams and this time i dont know what i did wrong i installed 106200 pro comp cams and the car just turn over it fired up for 2 sec and died is it normal cause it a bigger cams it need a tune or timing off. help any advise. with all this i install. cams 106200...

im doing a cam swap need the torque spec for the cam tower and the sequence does anyone have theme or knows where i can find theme. thanks..

i need some help i have a bad idle fluctuate from 800 rpm to 500 and does not stole but idle ruff and pick back up. so i change my IAC sensor change the throttle position sensor, clean the mass air sensor and throttle body, EGR 2 year old. there no engine light. when i drive it drive amazing...

need some help my car run good some time at idle it will idle down run rough but not stall i change the fuel pump filter and tps sensor and adjusted the tps sensor at .90 volt and still ones and a will wild start idleing at 500 to 600rpm and then go back up to 1000rpm and run good.. what else...

hi is it lots a work to swap my 5 speed to a 6 speed. there any wiring mods to do is it a strait bolt on to the motor and the axle.

i have the nos blackout kit and the instruction said at 125 shot to retard the timing is it necessary to do so. i have few engine mods up grades bigger injector throttle body and upper intake spacer cold air, will make a different or as to do with the timing.

are Electric Exhaust Cutout Kit wort it i know they will give me a amazing sound will it affect the performance of the car. i cant install long tube cause of my etest but maybe with the exhaust cut out will free up some exhaust faster maybe give me some more power...

my engine is coming out will be doing cams and nos 100 shot. is it worth it to have it stroke and what would be the best stroker kit 5.0 5.4 i like to stay n/a i dont 7000$ to supercharge it . is there lots of hp gain buy doing it. what are the vantage.

i like to know if porting the upper intake worth the money. what him looking around to pay to do something like that and what my gain.. in hp. him adding upper intake spacer and cams

Hesitation under hard acceleration when i drive the car run normal idle normal only when im driving and push it to pass or floor it it hesitate.. i change the spark plug and fuel pump and fuel filter. still hesitate at WOT. Any clue what could it be

my cancer of mach 0 car just started doing this when i give it WOT it hesitated but only if i push it ... if i accelarate normal all the way to 7 even 8000rpm does not hesitate only when i push it.. will in gear. i check spark plug coil packs good gas 93oct... i have a tune chip but its 4...

those any one ever used this Vibrant 11619 J-Style Oxygen Sensor Restrictor Fitting with Adjustable Gas Flow Inserts do they work. i have a bassani off road x-pipe with 2 hiflow cat but my engine light still come on for bank 1 and 2. my stock h-pipe as 4 cats and passes etest. now im trying to...

my cruise control not working when im pressing the on botton noting is working the cruise light does not come on. where do i start need it fix will be selling my car.

looking for some header for my mach 1 the only thing i found are jba is there anything else out there for shorty header cause we have etest in my city and i cant put long tube. putting cams in and it recommended that i up grade the header or exhausts system i like to get top hp out of theme..

im looking to buy some shorty header for my 2003 mach 1 JBA Cat4ward Shorty Headers or something else thta after market for my car.

we have etest in my city and i wont be able to pass my etest with my bassani x-pipe. my car cam and tune for the bassani xpipe with the CO2 are delete just like to get some advise on this flowmaster if it better then the stock hpipe and wont loose that much power. DONT WHAT TOO LOOSE MY...

I'm looking to perchase a zex black out kit with 100 shot of nos. do I have to get my car tune with timing retard. It's normally used only on open trottle . I'm getting cams and upgraded injectors. And fuel pump.