Search results

Hey so I’ve never really looked into this kinda stuff and I’ve never been into sports really but I was given something recently that I’m having a little trouble with. I’ve tried multiple Facebook groups and my post always gets deleted, but I’m really not sure where to even start with this thing...

Selling the last of my IRS parts I’ve had laying around for a project I never got around to. Upper control arms - $75 each, $125 for the set. Lower control arms - $75 each, $125 for the set. Sway bar - $50 Passenger knuckle - Sold Bare pumpkin - Sold Located in Antioch, CA. Will ship on...

Selling a new set of pistons I got as a package a while back. Specs as follows - -16cc dish w/ 4v valve reliefs (8.5:1) Upgraded .200 wall wrist pins Std bore Rings included On MHS’s site they’re listed for $1021.59. Buy them without any back order or wait time for $850 shipped (obo). Will...

Hey guys, I’m changing up the setup on my car for a specific look so this stuff is for sale. 04 Mach 1 upper and lower. Lid powder coated black, lower painted (long story) high temp black. New gasket, ARP black hardware. $400 Siemen deka 60’s - sold Division x black fuel rails, never had...

I bought this 26 spline input shaft for a 05-10 tr3650 a few years back and never ended up using it. I think I paid somewhere in the $400 range for it from lethal performance, but it’s not on their site anymore. Brand new, never installed, just sat on the shelf wrapped up in a shirt in the box...

Hey all, it’s been forever since I’ve posted here. I’ve searched around and maybe I just don’t have the right combination of key words, but I have some questions about smog on my old cobra. My buddy bought the car from me 2009 - 2010ish as it sits with just a upper pulley, magnaflow x-pipe...

Okay lets try this again! Selling two 4.6 4v intake setups that I've had for a while. Both have been sitting on the motor in my car, mostly for mock-up, but never run. First is a Kar Kraft intake adapter, used to run a 289-302 intake on a 4.6 4v. Cool hotrod piece. Sold Next is a Sullivan...

Well, looks like I'm jumping on the "Selling my Mustang to buy a house" bandwagon. It's just like the title says, 2012 GT Premium coupe, Ingot Silver, 6MT, Brembo car with 41,700 miles on it. The mod list is short, but tasteful. Here's what's done - 2013 GT500 Brembo brake upgrade (15" front...

Someone hit my car, and I'm trying to find a replacement door before it goes in to the shop instead of repairing this one. I know it's a long shot, but if you have one let me know. I will entertain other colors as well, but ingot silver is preferred.

I'm selling the Lakewood bellhousing I had planned to use in my 69', NIB but has been sitting around for a little while. All hardware included as well. This is for the TKO600 transmission behind a modular motor. List price is $700+ at Summit under part number 15230, and I can't remember what I...

I'm selling the wheels I picked up a little while back from CA Fords. They're True Forged Mach 5s, 18x9 fronts with 18x10 rears. They are SN95 offset. I bought them for $1900, and had one wheel fixed because it was not true. I did not know this at the time, but its been taken care of. Right Way...

So here's what's going on right now. Currently I have a 2012 GT, and I want to lower my payments so I'm looking for another car to drive, and sell the 12'. I found a pretty nice 98' GT, bright atlantic blue with 65k miles for $8000 that I was almost certain I was going to buy. I also have a 69'...

I'm selling my 2012 GT Premium Brembo car to free up some funds. It's mostly stock, with a few mods- -Lowered on BMR springs -Tinted windows (55% sides, 5% 1/4s and rear) -BMR adjustable panhard bar -GT500 axle-back exhaust (I have the OEM mufflers) -Ford Racing M-2300-T brake package (2013...

Hey guys, I'm selling the AJE Coilovers I bought for the front of my 69' Mustang. They are on the car currently, but I will pull them off in a few minutes here and hopefully have pictures up in a little while. Part number AJE-6470 at the following link - 64-70 Mustang They are new, just...

I took these off of my car with 23k on the clock because I got a deal on the 2013 GT500 brakes that I couldn't pass up. I had planned on using them on my 69', but I don't want to build brackets and run all sorts of spacers and stuff, so I'm selling them. They are factory Brembos, stock pads...

As much as I'd like to run this setup, it's too tall for the car it was intended for, so here it is for sale. Everything is in good condition, and I had fully intended to use every part here in my 69', but hood clearance is an issue. Eaton supercharger - 70k miles, un ported w 2.8 pulley...

Hey guys, can someone with some 315s on an IRS take a measurement for me? I need to know how wide the rear track width (from outside to outside of the tires) is on a car with off the shelf 17x10.5 wheels. Preferably no spacers, but if you have spacers no worries as long as you know how thick...

Hey guys, I'm selling just about everything needed for a 03-04 cobra turbo swap off of a pretty clean 01 Cobra motor I picked up recently. 01 timing cover - Complete 01 intake (fixed version) comes with tb, fuel rails and injectors - Alt with bracket - Crossover tube - Needs...

Well guys, I finally feel like starting a thread on my 69' Mach 1. It started life as a bare-bones 1969 Mach 1, H code automatic car built in San Jose, CA. It had power steering, and manual drum brakes. As far as I know, the car has never left Northern California. I got the car in 2003, and...

Selling my LT's from my mach 1. They are pacesetter, and fit pretty well. These are the black painted version, and the paint has flaked off, but can be cleaned up pretty easy. They will fit 99-04, and 96-98's with an EGR delete. They are 1 5/8" primaries, with 3" collectors. The x-pipe is also...

Well guys, I've been building this car for about 6 months now, and I'm tired. I need to get something reliable, and finish my 69' Mach. I've been driving it for a few months now, and I've replaced the flywheel, clutch, and now the motor has to come back out to fix a few more issues. Either way...

I'm selling the axles that came off my IRS for my swap. Stock 99' axles, complete assembly in good shape. $200 plus shipping, pics available on request. Located in Antioch, CA.

Looking to trade my SRA out of my 03' Mach 1 for a 03-04 IRS, or 99-01 if the deal is right. It comes with Bassani cat-back, Mac girdle, and Eibach springs. Everything is in 100% working order, you can come check it out before committing. Drop your car off and I will do all the work, 100%...

Im listing this for a buddy of mine, right now im just trying to gauge the interest on it... Its a 91 camaro, clean title, 305 engine. It does need paint, and has all the interior and new carpet etc... The body is in pretty good shape, aside from needing paint. The motor is out and torn down...

Can someone put some CCW classics on this guy? With black centers, preferrably. (Sp?) Maby throw out some ideas too.. Im trying to decide on what wheels I want on my white 69 mach.