drag

That's right, we're offering 10% Off through 7/10 for pre-ordering our LP5 Drag Pack Wheels! We are expected to start shipping in 2-3 weeks, possibly sooner. If you have any questions, don't hesitate to reach out!

Multiple Forgestar D5 pallets just dropped here at Lethal Performance.. Both beadlock and non-beadlock 17x10's are now replenished! Give us a shout if you're interested in a set.. we'll get a wheel/tire package going for you! www.lethalperformance.com Forgestar 17X10" D5 Flow Formed Drag Wheel...

Multiple Forgestar D5 pallets just dropped here at Lethal Performance.. Both beadlock and non-beadlock 17x10's are now replenished! Give us a shout if you're interested in a set.. we'll get a wheel/tire package going for you! www.lethalperformance.com Forgestar 17X10" D5 Flow Formed Drag Wheel...

i own a 2004 ford lightning with some very tasteful mods. I was looking into making it a little faster for the track while still keeping it as a daily Currently the truck has 396whp -Mods Throttle body spacer Headers/full exhaust Methanol setup (don’t know if it’s hooked up) how should I...

Hey guys, looking for some info to see if a drag setup I'm looking to pick up will fit on my 03 that still has the IRS. It has the Maximum Motorsports rear tie rods and some other beefed up mods. Im looking to pick up a set of 15" champion beadlocks and 17" alumatars. Champions have 28x10.5 mt...

Hey guys, so I recently made the switch from my turbo terminator to an 07 GT500. 2.8KB and full supporting mods making over 700 to the wheels. The car currently is on Forgestar F14s and after the recent release of the 15x10 f14 drag edition wheels, I thought it would make for an awesome drag...

Hows it going guys. Came across a set of weld dragstars. They're 15x10 in the back and have a 4in backspacing. Was wondering if they will fit. Read up on that the calipers and banjo bolt will most likely have to be shaved down, but i am not sure about the backspacing. Car is a 96 cobra, thanks!

i have a 1999 Ford Taurus SE that ive been working on It has a 3.0L DOHC Duratec v6 that i wanna run NOS as well as turbocharge it with a Garrett GT5541R i know It has an aluminum engine block and aluminum DOHC cylinder heads. The cylinders are lined with cast iron but i definitely wanna push...

This Friday I'm looking to run my 2004 cobra. I've run other cars before but not this one. Here's the basic's of the car 2004 Cobra -2.76 pulley (4lb lower) -tune -x pipe back exhaust -2 step / wotbox -stock clutch -suspension work (not exactly sure, came with the car) -brand new...

http://www.youtube.com/watch?v=vpudrJ3hkkY

So I've been looking into buying suspension suited for street/strip applications. Here is a couple ideas I have come up with and some questions I have since I don't know much about suspension, especially spring rates. Idea 1: Strange 10-way adjustable shocks Strange 10-way adjustable...

http://www.youtube.com/watch?v=OxR9llU4hEA

http://www.youtube.com/watch?v=ovI345T4htY

This is my "between Mustangs" car. I had a 2003 Mach 1, which I sold in an attempt to be responsible. Well that didn't work too well, and this is the result. I've owned this car for 9.5 years, and I'm about ready for my next Mustang. Until I find the right one, I'll keep playing with this...

Race Star - Dark Star - Black Chrome wheels 17X4.5 with M&H Racemaster tires 185/55/17 15X10 with M/T ET Drag Slick Tires - 28.0 / 10.5 - 15S Wheels are in perfect like new condition no scratches or scrapes, Wheels and Tires have been mounted on the car only once and have about 8 passes on...

While i was browsing the country for cobras/machs/mustangs etc this morning i ran across this gem. Full built all out drag car. Only needs a few more components to be finished (trans, fuel system, wiring & plumbing) thought it was still a decent price and worth a look for you guys!! :rockon...

I've finally made up my mind between the nitto555's and the toyo proxes... Ive read only good things about the proxes which is why im choosing them. Im putting 305/35/18 on 10" wide rims. Now the only issue is i don't know which tires to put in the front. I know i can put some 255/35/18 toyos in...

Hey guys, Just seeing what options are out there for a good light weight drag rim for use on the 11-12 SVTPP brakes that I can just throw on without needing the relocation brackets that are at least 10" wide. :shrug: Either sizes or name of rims will do. :beer:

My gears are the stock 3.55. Car puts down over 600 torque. I cant get off the line in a hurry because i just lite up the tires. Can swapping to 3.27 gears decrease torque so i can hook upon take off? The tires i had were bfg 315 drag radials.

Bogart drag racing P1-w billet lite. fronts are 15x5 and the rears are 16x11. Wheels have mounted tires, the fronts are still in good shape, the slicks need to be replaced. Also there are M/T tubes on the rears. Asking $1300 OBO, I've looked into a few different companies for shipping depending...

Direct bolt on custom made for 03 cobra, fits mustang 99-04. Asking $2200(not including shipping).

Im going to swap out the irs from my cobra for the solid axle in my gt. My goal is to be able to hook up well and get down the track. I'll be at around 600-630rwhp after a few more mods and a new tune. Right now its impossible to accelerate decently for me and its really annoying. So I need...

As title states i am looking for 2 Lakewood 90/10 struts for a foxbody. Located in central FL for a local pickup if your close. Let me know what you have. Thank you.

All of you with polished racestars , have you found any good ways to clean them and shine them ? I've had mine for around a year and haven't really found a good product or method . I know they are clear coated but t thought I'd ask . Thanks

vOAnIQCK_M8&feature It is a rolling pass, starts @ 40km The stang has 100 octane tune, xpipe, JBA catless exaust and CAI The Evo has unknown mods