Tried loading an updated tune this weekend. History - ran out of fuel with my current setup on 52lb injectors (GT500 with VMP GenIII). No issues loading updated tunes from my tuner up to this point. Installed 95lb injectors and received a startup tune - loaded into the X4 with no issues. Car...
I was looking over specs for various years of the Cobra Jet and it dawned on me that they never put the 5.8 in the CJ.
Year Motor Supercharger
2008 FE 5.4 2.3 tvs
2010 AL 5.4 2.3 tvs
2012 AL 5.4 2.3 tvs
2013 5.0 2.9 whipple
2013 would have been the year, but Ford opted to run the 5.0...
Hey,
Looking for informed opinions. I'm not completely sure what all of the differences are between each of the year groups, hopefully someone can help me out.
I know most of the general things like engine displacement/composition (aluminum/iron). Not positive if the TR6060 drastically changes...
Haven't came across an image of the 2020 GT500 with the front bumper Photoshopped with paint that matches the car (i.e. not black). Was hoping one of you Photoshop gurus could give it a go!
Installing the kennel bell 3.2lc on my 14 gt500. Kit comes.witg instructions for older gt500. Has anyone put this kit on there 13 or 14? Maybe have pictures of where the coolant lines from super charger tie in to intercooler tank.
Going to drop my '08 GT500 back off at Power By The Hour in the coming weeks to finish up some upgrades. With my schedule, it's hard to find the time to get them the car but I'll have the time soon. Outstanding shop with top notch work. Here is what is left to install since the last visit...
So I may have the opportunity to purchase a OEM 2014 Shelby GT500 supercharger. Does anyone have information on what I would need for the conversion? Not too many results popped up on the internet so I figured someone here may know.
Hi all,
While there are a lot of threads out there raving about the MGW Shifter for the GT500, I was curious about a few things that I did not see addressed. Mainly, I am curious about any added NVH that installing an MGW might bring to the driving experience and how much more of an...
Bought this to use in my build and then went in a different direction and no longer need it. Located in Virginia Beach, VA 23464. Shipping on your dime.
Hi all,
I am selling my take off M122 with a Steeda 2.6 pulley and a VMP Inlet Elbow. I recently swapped to a ported M122 setup with a 2.2 pulley and figured that this one would really just sit on the shelf.
The blower has about 50,000 miles on it and overall the ribbing on the pulley, the...
Hey everyone!
I recently bought a 07 GT500; car now has 22k miles on it. It's relatively unmolested; the previous owner put a K&N series 57 intake and a set of axle-backs on it. I don't think it's been tuned thus far (considering the series 57 is advertised as a "no tune required" unit).
A few...
I have a 2012 GT500 with trinity tvs and stock upper/lower. Recently purchased a IW 15% lower/ whipple monoblade/ and JLT127mm. Will be getting long tubes next. Car currently has 13/14 injectors and stock fuel pumps, but I also acquired a VMP BAP. Will I be safe running California 91 (Shell) as...
SOLD
For sale is a set of 8 coils for any of fords 4v engines. I bought this set hoping to fix an engine issue I had, turns out it wasn't the coils so I kept the other set.
$175.00
Hi all,
I've kind of decided my car is too stiff for the street; it's just not compliant over normal bumps and the car is simply jarred around too much by otherwise pretty good streets. Now, the car is lowered, I think probably 1.5 inches all around and the previous owner put the lowering...
Hi all,
I've been experiencing issues with the feel of my clutch pedal as of late. I did replace the clutch with a McLeod RST (800HP version) and of course changed out the clutch master, clutch slave cylinder, pilot bearing, all the good stuff. Now, I've been noticing that when I get in the...
As the title states I'm looking for a heat exchanger for a 2008 gt500. Preferably a dual fan set up. Let me know what you got. You can text me at 7066766201
For sale is my 2014 Mustang Shelby GT500 in a graphite with red stripes. SVT performance pack, Recaro racing seats, navigation, Shaker Sound System, ect. Car has been Garage kept always, Service done always, non-smoker, and has tasteful but conservative upgrades. First owner of the car garage...
I have a 2014 GT500 (Track Pack), with a Griggs GR40 Suspension that is lowered 2” with a 315 clearance kit and a Watts Link (All Griggs Racing Components). I would like to replace my rear stock wheels and tires with the following:
2 New 18” MT Wheels (I like the wheels shown in the ad...
Hello everyone,
I recently had a mechanical issue with my 2011 GT500. What sounded initially like exhaust rubbing the frame within minutes became louder and louder while I shut down the car. I have not had a chance to deep dive it yet as I have been working all week. It sounds like a bearing...
Is anyone in the market for a full set of or pair of nitto invo 295 35 20 ... I have 4 brand new with stickers ... never mounted please call or text 817 770 1851 my name is Scott ... I prefer local sale in dfw TX 500 for 2 or 900 for all 4 ... or best offer