headers

Enter the Show Us Your Borla Photo / Video Contest today for your chance to win $1,000 & a Trip to the 2017 SEMA Show!! #BorlaContest2017 SHOW US YOUR BORLA® is an online contest for owners of vehicles that are fitted with products manufactured by BORLA® Performance Industries – this could be...

It looks like im going with a set of bassani mid length headers. How does everyone who has them like them? good tone? good power? I will be using a mac prochamber mid pipe. Anyone with sound vids, please post. Thanks

Hey there! Hope you guys have been having a fantastic weekend!! So Id like people to shed some knowledge on this build; Im planing on purchasing a Ford Performance Power pack 3 ( Voodoo intake, 87mm throttlebody, cold air intake, some silly calb tool ) Now what parts should accommodate this...

SOLD I have a set of ARH LT headers with offroad X Pipe brand new in the box (Part# MST-CY78NC). I had bought these for my 2014 Track Pack GT but never put them on and I no longer have that car. As stated in the subject of the thread, they are still in the box as shown in the pictures. I'm...

I've decided to start saving up for some mods in the spring. I would like bassani mid length headers so I can remove the transmission easily, my car came with high flow cats. Would i need to buy a mid pipe also or can I simply use the high flow cats and get someone to weld in a pipe? (how much...

2001 Mustang Cobra, 100k miles, CA I, Bbk long tubes,bbk x pipe...only mods on drivetrain. Recently installed long tubes and x pipe. Got a lean code then installed MIL Eliminaters all within 20 miles.. no more codes! Drive car another 50 miles hear light tapping thought it was header leak...

2012 5.0, Im looking to get some Long tubes, a catted X-pipe and some axle backs.. and i am also looking to wake the devil, As loud as can be. I was looking at Pyros polished long tubes with some kind of roush axlebacks. THROW Suggestions at me. it just needs to have cat.

Tuned Custom HP Tuners built a 2015 Mustang as a multi-purpose promotional project By Steve Turner Photos courtesy of HP Tuners and Optima Search for the Ultimate Street Car In the automotive aftermarket it is standard practice to build project vehicles to garner attention. These cars...

Flat-Out Aggressive Borla’s GT350 ATAK system delivers aggressive sound and more power By Steve Turner Photos courtesy of Borla Performance Industries There is no doubt that the factory exhaust system on the latest Shelby GT350 sounds fantastic, especially with its adjustable valves...

Long Revision Lethal Performance upgrades its GT350 project with Kooks exhaust By Steve Turner Pushing the performance of its project cars is Lethal Performance’s calling card. Soon after leaving Weikert Ford in a cloud of smoke, Team Lethal embarked on an aggressive modding plan for its...

I am looking for a set of shorty headers for my 2011 Mustang GT within driving distance of Fresno CA. willing to meet hallways. I have a lethal O/R H pipe, 11-12 GT grill with fog deletes/foglights if anyone is interested in trade. PM if interested

Looking for a set of Kooks long tubes for my 04 Cobra, preperably 1-5/8 or 3/4, with a connecting O/R X pipe. Let me know what you have.

I'm selling a brand new set of kooks long tube headers 1 7/8 primaries 3 1/2 collector. I bought these, never used them and don't need them anymore. There still in the orginal box with gaskets and o2 extentions. Pm or text 8647237042. Thanks asking $1000

These were on the car for 800 Miles and were recently removed since the customer is going to a turbo setup. These parts new cost $2,500.00. $1,500.00 - S5407R - Bassani Stainless Steel Longtubes, 1 3/4">1 7/8" with 3" Collectors 16 gauge stainless steel for strength and durability. The...

Breathe Deep Kooks unlocks the potential of the Voodoo 5.2-liter engine with full exhaust By Steve Turner Photos by Steve Turner and courtesy of Joe Charles There is little doubt that the 5.2-liter Voodoo engine in the latest Shelby GT350 exhales with the best exhaust sound of any factory...

The headers and x-pipes were installed on my 2014 GT for a little over a year. There is absolutely nothing wrong with them. My GT made 465RWHP with these and the CJ manifold installed. Check Alex Walton on youtube to see the dyno. I switched them out for a pair of Kooks 1 7/8 trying to squeeze...

Have a new set of longtubes for sale. Will ship or local pick up. They were bought for my car and than things changed and they are just extra parts now. Will fit 99 and later 4 valve cobras or 4v swapped cars. text for more info @ 724 961 4437 ASKING $700 Paid $980 new. They have egr bungs if...

Full exhaust off of a 2013 GT500 (will fit 2013-2014) purchased from Evolution Performance. They have 2K miles on them. Magnaflow Street Series 3" Catback Exhaust with Polished Tips - new @ $935 (Item# 15172) Stainless Works 1 7/8 LongTube Headers with Off Road X-Pipe - new @ $1,390.00...

This is a brand new unused set of Kooks stainless steel long tube headers that fit the 96-04 Mustang GT with 4.6L 2V. Headers are 1 5/8" with 2 1/2" collector. Mids and X-pipe are matching 2 1/2". Nothing has ever been mounted and the hardware is still sealed in the original packaging...

Hey guys. I have a 2013 Mustang GT with the Kooks catback. Sounds awesome so far but I'll be adding 1 7/8 headers and an offroad mid pipe. Any recommendations between the X and the H? I've only found one person who did videos of the Kooks full with offroad X and can't get any replies from the...

ISO Mac Long Tube headers. Ordered a set and O/R H pipe on Monday. H pipe shipped Tuesday and I recived an email saying the headers are on back order and won't hit production until mid March. I've checked numerous sites and no one has any. I'm looking for a used set of possible. Got a new 4.6l...

Looking for Stainless Works, Kooks or ARH. Shoot me a pm with a price shipped to 37029 Would rather them be lightly used to avoid the "new" cost, but either way works! 615-574-1683

Used and banged up BBK LT Headers off a 01 Cobra - $150 obo Fairly new (2 years) BBK O/R XPipe in great shape - $125 obo $200 for both will ship @ buyers expense, located in East PA email for pics

Best Longtubes/X combo for the '11-'14 GT? Looking like Stainless Works is my best option! Never really heard any fitment issue horror stories out of those! At the price, the American Racing & Kooks headers are a little out of my range right now! I've heard to many issues with fitment on the...

**SOLD**Stainless Works 2011-2014 GT500 1 7/8" headers with high flow catted x-pipe and with off road cat delete leads. Appx 2000 miles on headers. H-pipe no longer available. $1665 new, $1100/OBO.