Bassani catback for sale or trade for another catback - 400 OBO
Lt grey 03 cobra seats-mint cond.-trade for charcoal cobra seats
Ram powergrip 26 spline clutch-150 OBO
I recently took my 2004 cobra for a 4 wheel alignment because the tires that came on it were work very uneven. It's lowered 1.5 Inches. I bought the FTBR eccentric rear camber bolts because I figured I'd need them to get the right amount of adjustment. The guy at the shop (which is a pretty...
03-04 cobra heat extanger with 38k miles brackets hoses and hard lines 250$
99-04 Irs cobra front torque brace made by Kennybrown 100$
Werbro 255 pumps less then 5 K going e85 120$
42# injectors re flowed and balanced @50# 110$ flow work was more then that no miles since flow work
Oem...
I am in desperate need of help. I purchased a 99 Cobra IRS for my 95 Cobra and I am with a $XX00 paperweight. I bought all new bushing from MM and the BF brace. I also picked up a Hard Launch Brace, 31 spline Diff & 04 half-shafts, Borla, H&R Race Springs, Bilstiens on all 4 corners, and all...
I have a solid rear from my 03 gt im lookin to trade for an irs. Includes the following:
Solid axle with 3.73 gears
Grippi upper and lower control arms
Sperical bushings
Flowmaster catback
Looking to trade all that for irs with catback
Call/text brandon 704-425-3503.
Text for pics
I have a SCT 3000 hand tuner, only tuned to 1 car. 2.8 pulley with hub and a 3 inch pulley, they are removable. 100mm snubber with the bolts and an IRS brace, its a Motoblue brand. Its for a stock read diff cover. I also have a few stock tranny parts. Prices are shipped and you pay the fee's or...
03 Cobra IRS FS or trade SOLD!!!!!!!!
03 Cobra IRS
link to my ad. call text or pm $950 or trade for T56, cams, Eaton swap, other blowers or turbos, or other parts. let me know what you have!
I have a moto blue IRS brace for a stock cover. I bought it from a guy off here but then decided to go with the Ford Racing cover. I'll sell it 80 bucks shipped. I also have some stock tranny parts. Shifter, input shaft, retainer sleeve. Make offer. Everything is used but everything looks and is...
ended up breaking the SEAL on my diff. cover from my trip to the track, luckily it didnt break the cover but anyhow i was dreading ripping apart the whole irs so I figured I try to mcgruber it. I left damn near everything in tact just unbolted the driveshaft and the front mount holding the pig...
I have a 92 LX with aftermarket axles and 3.73 gears I'd like to trade for an IRS. I will include the aftermarket control arms, springs, and exhaust. Text me at (812) 890-5715
Hey all, i was just wondering if anyone on the forum rebuilds cobra differentials if the entire diff is sent to them, or knows of a good place in the CENTEX area that does it well and correctly with the proper tools. I think i would rather do full rebuild and have the warm fuzzy about it then...
SOLD.......I have a pair of IRS knuckles that I have disassembled, blasted the knuckles, and hubs, painted, and reassembled with new ford racing hub bearings, new full tilt boogie racing cross axis joints, and also new adjustable sway bar end links. These parts are new never been on a car or ran...
i have a 03 cobra irs w 3.73 gears poly diff bushing and irs brace and it has a drip from the brace install no breaks shocks or springs 42k mile everything works as it should what is it worth and as trade k member a a arms a fair trade? i know i could part it out and make money but trade would...
So my 03 had some pretty violent wheel hop when I bought it. The suspension was 99% stock. It had MM sub frame polly bushings and thats it. I did the whole cut springs thing, 18" wheels and sits on nt555r 305/35/18 tires. Shocks are newer but just bilstein factory replacements i believe. I...
oem front torque brace 75 obo great shape
buillet flow 2.93 upper ring and hub (black) 70 obo good shape
03 cobra head light housing 100 obo been buffed and tented vinyl (some heat cracks) e mail for pics
bi xezon hid kit (high beam 8000k) maybe 2500 miles and 2 years old (40 obo)
99-04...
I have very bad wheel hop like alot of people do. Just out of curiousity would this kit along with sub frame bushings be enough to reduce or eliminate wheel hop? Also is this even a good kit? I dont know much about bushings but ive heard that these are the ones you would get through MM. Any help...
I have a stock '03 Cobra IRS in my Mach 1. I am looking to trade for a built solid axle or a stock solid axle plus cash.
Unsure on the mileage on the IRS. It was in the car when I purchased it. I would prefer a live axle. Make me an offer!
Located in central Indiana.
EDIT: Apparently these are not from an 03/04, but more likely from a 99/01
Spent some time acquiring parts for an IRS conversion in my 98 Cobra, but the project went south and the parts have been sitting in my garage for a while taking up space.
I would appreciate any kind of advice on...
Need a spare vent nipple for the differential. Anyone know of a part # for one of these?
Did a search didn't happen to see anyone list a part # for this if they're even available.
I am going to sell my car if I can make up some money on parts I have installed. Low mileage IRS with full tilt boogie racing bushings installed recently. Has the Irs brace. Sway bar end links solid rear mount and control arms. Everything is 100%. Also the diff cover was sealed and has royal...
Up for sale is a magnaflow catback with flowmasters welded in. Polished over the summer but probably could use a good cleaning before installing it. Taking it off the car tonight or tomorrow. I will post better pics when off the car. $250/bo. local pickup. If interested give me a call at...
I've gotten my hands on two IRS's i'll be parting out over time, so i'll be adding other parts besides these to this post over time.
Everything is OBO +S&H. All the parts are as is and their condition is as you'd expect them to be for the mileage that's on them.
Pictures will be sent to anyone...