Originally posted by IceBourg
Thanks for your time and effort!!
NP guys :thumbsup: I almost have enough info to create a version 1.1. I should have it ready in a few weeks or so....
Originally posted by IceBourg
Thanks for your time and effort!!
Originally posted by frank3si
NetworkingGuru, your FAQ is fantastic. I think I'm finally getting my ducks in a row to order a Cobra, and this collection of info has really been a big help. One suggestion: item 2.2.8 How does the supercharger work? points to a link with missing graphics, though the text remaining is still very good. This link at Eaton's site: automotive.eaton.com/product/engine_controls/whysuperchargers.html provides very good additional info and illustrations.
Again, thanks for your efforts....
Frank
Originally posted by jhwalker
Did you ever talk about how you plan to keep this material maintained as new information about the 2003 SVT Cobra becomes available, or do you not see that as a problem?
Originally posted by vbaz13jhwalker
How can we keep up with any updates or additions to your site.
Originally posted by 03DOHC
Here's something that you may want to add to the FAQ. It was posted by Wicked393CILX. BTW, I tried it and it worked.
There are 9 steps you need to follow to deactivate or activate your Belt Minder system. Before doing so, make sure that:
The parking brake is set.
The truck/car is in Park (automatic), Neutral (manual).
The ignition is OFF.
All doors are closed.
The driver's safety belt is un-buckled.
The parking and headlights are OFF.
Then follow these 9 steps:
Turn the ignition switch to ON, but DO NOT START.
Wait for the safety belt warning light to go OFF(1-2 minutes).
Steps 3-5 MUST be completed within 60 seconds!
Buckle, then un-buckle the driver's safety belt 3 times, ending with the belt un-buckled.
Turn on the headlights, turn off the headlights.
Buckle, then un-buckle the driver's safety belt 3 times, ending with the belt un-buckled.
After step 5, the Safety Belt Warning Light will be turned on for 3 seconds.
Within 7 seconds of the safety belt warning light turning OFF, buckle then un-buckle the safety belt.
This will disable the Belt Minder if it is currently enabled, or enable the Belt Minder if it is currently disabled.
Confirmation of the disabling of the Belt Minder is provided by flashing the safety belt warning light 4 times per seconds for 3 seconds.
Confirmation of the enabling of the Belt Minder is provided by flashing the safety belt warning light 4 times per seconds for 3 seconds, followed by 3 seconds with the safety belt light off, then followed by flashing the safety belt light 4 times per second for 3 seconds again.
After confirmation, the deactivation/activation of the Belt Minder procedure is complete.