2013 GT500 VMP Gen3 TVS results.

[Streetpwr281]

Hell I daily drive a Whipple 2.9L Gen 3 using a 3.0” upper and IW 15% lower. Planning to run 2.75” upper when I build the short-block. “Spin that smoke-wagon and see what happens!”


Sent from my iPhone using Tapatalk

 

[boduke0220]

 

[Turbo98GT]

Another factor I asked for to be added was pedal angle. The TVS had severe traction issues (lots of pedaling) whereas the Whipple did not.

 

[gimmie11s]

Gotta love the damn ported trinity TVS.

Over achiever!!


Sent from my iPhone using svtperformance.com

 

[Catmonkey]

Never seen reference to a 20% crank damper before. Who makes that?

 

[sleek98]

Its custom, I asked him about it and he said he can order it for anyone if you call.

 

[Turbo98GT]

ATI and its a 2 month wait

 

[Cman01]

New vid from VMP...………...wonder if the owner is a member here:

 

[Streetpwr281]

New vid from VMP...………...wonder if the owner is a member here:

Makes sense. Near identical setup to my 2013 except no Boostane and Whipple Gen 3 2.9L. W Twinjet 67mm TB I’m also ~ 780rwhp but on pure pump 93 at 16 degrees of timing and 18 - 19psi. Both good blowers. Splitting hairs really just pick which one pleases you aesthetically.


Sent from my iPhone using Tapatalk

 

[Turbo98GT]

 

[biminiLX]

Very impressive!
I'll be joining the 4-digit TVS club in the next few weeks.
I'm expecting solid dyno numbers, but the focus on my car is getting a solid 9.xx pass on the true street manual trans combo.
We will see at Mod Nats.
I plan on using a 15%/2.5 to start and then likely 2.4 upper.
10.009@145 Gen 2R with stock brakes an 17" DOTs.
I haven't seen an SAE Dynojet of their 2.3 but mine is also a ported BPS version on a 15/2.5% with 965rwhp SAE without ice in the tank at 23-24* timing.
Dyno numbers are fun, but I hope Lund brings it to Mod Nats.
Car also has an NX spray bar in the lower intake for NOS but never installed.
Amazing results from a 2.65 TVS, great job to all involved!
-J

 

[boduke0220]

Too bad they didn't have jordans 20% lower to throw on.
Crazy numbers!

 

[Turbo98GT]

I asked Lund to race me in the Roll Racing class since his car is also a pure street car (no cage, no badass axles, etc) . Would be a fun race

 

[Turbo98GT]

Too bad they didn't have jordans 20% lower to throw on.
Crazy numbers!

It's going to happen

 

[gimmie11s]

View attachment 1515472

What a ****ing beast.

That car must be near undrivable down the strip.

Almost 1000 wheel torque!?!! Good God.

Must be fun as hell though.


Sent from my iPhone using the svtperformance.com mobile app

 

[CD07GT500]

View attachment 1515472

Solid 1100 even without the lift spike at the end.

 

[Klaus]

View attachment 1515284

So, a factory TVS out traps a 2.9 whipple in the 1/4 w/ 2* less timing and 700 less engine RPM? Hmmm.

 

[Streetpwr281]

Sure with a wagon wheel 3.25” upper pulley! Like running the 100 meters w steel toed work boots. Put at least a 2.75” upper pulley on the Whipple 2.9L and then let’s compare.


Sent from my iPhone using Tapatalk

 

[Turbo98GT]

Sure with a wagon wheel 3.25” upper pulley! Like running the 100 meters w steel toed work boots. Put at least a 2.75” upper pulley on the Whipple 2.9L and then let’s compare.


Sent from my iPhone using Tapatalk

I think your failing to see the 20% lower. His main rotor speed on that Whipple is 20k rpm, 32K for his small rotor. Not maxed out yet but at 95% of its max RPM.

A better analogy is like running 100m dash at 95% speed.

 

[Turbo98GT]

So, a factory TVS out traps a 2.9 whipple in the 1/4 w/ 2* less timing and 700 less engine RPM? Hmmm.

TVS has way more midrange and usable power. Peak power doesnt mean much in this application