I'm currently at 500rwhp and 470rwtq I'm trying to hit around 600 or close to it with stock supercharger
Nitrous!!!
You will not make 600 hp with a stock blower. Even spraying a shit ton of nitrous. The blower is just not efficient enough to move that amount of air.
You can make mid 500 hp with nitrous and a ported eaton.
Shorten your signature because one of the mods will soon nail you for it. That's really long. Try removing the line breaks in between and go with one font size smaller. That should work.Alright thanks for the help looks like ima have to go with nitrous as much as didn't looks like the only way to get there and yea that's my signature lol
Hey, I am not sure if this has been covered already, but with the stock blower, 600 hp is pretty hard to achieve, and if it was done, the blower would not be able to withstand that type of power. I think even with a stage 6 port and 2.76 pulleys, bolt ons, and a dyno tune will have you shy of 600 but still not at 600. At that point, i would just say get a whipple 2.3 and get that 600hp like it is nothing, but then again, not all of us have that type of money to spend after we spent so much money already on our terminators lol.
bullshit. You can make easily 600+ with nitrous.
http://www.modularfords.com/threads/64886-Nitrous-Eaton-combo/page3
Guy made 578 whp and over 730 tq on a 75 shot. There's guys running 150 and 200 shots. You're saying they wont make 20 hp? Come on.
Guys run a ported eaton and a small shot and are in the 10s all day every day.
The eaton is just too small to move that volume of air.
So I was able to make my signature smaller and 600 hp is alot to ask from stock blower but can it be done without nitrous I don't wanna harm the engine if anything I'll just have to save up to buy a bigger blower