NXSVTCOBRA
New Member
I have a 12 A6 GT car and the time has come to add a power adder. I'm just in the air between the two (Paxton or on3). I have always built turbo cars (Aside from my whipple terminator) and just want some real world opinions. I don't care to run the EDP, CPR, Hellion or JPC kit. Nothing to take away from them, this is a daily driven car that will never go near the HP potential that those kits offer; this is my STREET car not my STREETABLE race car. My goal is 9.80-9.99's or so with my coyote car. Just want some opinion from those who's went from one to the other. I've been idle about two months on which direction to go. As of now the car is completely stock aside from mild tuning that I've done, complete suspension, and exhaust.
A side note, I am an individual capable of doing most anything financially and physically with fabrication skills available, tools, lift, etc. I don't care if the on3 requires fabrication so let's save that.
A side note, I am an individual capable of doing most anything financially and physically with fabrication skills available, tools, lift, etc. I don't care if the on3 requires fabrication so let's save that.