Not sure where to put this. Looking for advice on a raised hood. Its a 2001 cobra and I just got done with my blower install. I have a fr500 intake and I found the spacer for the top plate and the spacer for the throttle body. With everything attached and mounted Im about a inch or two too tall. Cant tell because when I close the hood I start making contact on the throttle body, push a little more then its into the intercooler pipe.
Question is, are these aftermarket hoods raised more than just in the center. I think I need about an inch prior too the main hump portion on these raised hoods. I cant tell by the pictures but if you look at the hood line that runs from the grill cut out (portion on the inside of the headlights actual part of the bumper) on new edge mustangs is it raised there from the factory hood at that point also?
Thanks sorry for the hard worded description and question its goofy trying to type what Im trying to get answered...
Question is, are these aftermarket hoods raised more than just in the center. I think I need about an inch prior too the main hump portion on these raised hoods. I cant tell by the pictures but if you look at the hood line that runs from the grill cut out (portion on the inside of the headlights actual part of the bumper) on new edge mustangs is it raised there from the factory hood at that point also?
Thanks sorry for the hard worded description and question its goofy trying to type what Im trying to get answered...