FS: '01 31 spline IRS--Partout

01bluesnake

Active Member
Established Member
Joined
Apr 19, 2009
Messages
3,431
Location
chicago burbs Des Plaines
**Parting out unit**
Hi, this is an '01 IRS unit which means it has 31 spline axles. i picked this up with broken spider gears and decided to fix it and sell it as an assembly . I went through disassembled complete unit and cleaned everything up and retorqued it all. I did also rebuild the pumpkin with a new spider gear set, 3.55 gears and some seals and bearings and filled it with fresh motorcraft 75w140 fluid & friction modifier. I machined the rotors, cleaned and lubed the caliper slides as well. It also has new wheel bearings with about 1k on them.

ALL items plus shipping

1. both 31 spline axles SOLD
2. both tie rod assemblies $50
3. both abs sensors SOLD
4. cobra brake calipers assemblies , rotors, and pads SOLD
5. IRS cradle SOLD
6. sway bar and end links SOLD
7. both upper control arms SOLD
8. both lower control arms SOLD
9. 31 spline IRS pumpkin assembly with 3.55's SOLD
10. IRS knuckles with hubs and newer bearings SOLD

th_IMG00176-20100214-2130.gif


th_IMG00177-20100214-2130.gif


th_IMG00178-20100214-2130.gif


th_IMG00179-20100214-2130.gif
 
Last edited:

Mystic-SVT

snuggle fest, mmmmm!
Established Member
Joined
Jul 29, 2008
Messages
3,623
Location
San Marcos, TX
How much for the center section (pumpkin)? Mine is going bad most likely and I just want to replace it with another one
 

ninzu001

New Member
Established Member
Joined
Mar 18, 2006
Messages
9
Location
Fontana
Axles

I need the 31 spline axles. How much is shipping to 92335. I just broke an axles yesterday. ouch!
 

mcduffer7

Member
Established Member
Joined
Apr 11, 2010
Messages
263
Location
Illinois
I need just the sway bar end links, not the sway bar. Are they the same as the 03 irs ones? How much?
 

Users who are viewing this thread



Top