**Parting out unit**
Hi, this is an '01 IRS unit which means it has 31 spline axles. i picked this up with broken spider gears and decided to fix it and sell it as an assembly . I went through disassembled complete unit and cleaned everything up and retorqued it all. I did also rebuild the pumpkin with a new spider gear set, 3.55 gears and some seals and bearings and filled it with fresh motorcraft 75w140 fluid & friction modifier. I machined the rotors, cleaned and lubed the caliper slides as well. It also has new wheel bearings with about 1k on them.
ALL items plus shipping
1. both 31 spline axles SOLD
2. both tie rod assemblies $50
3. both abs sensors SOLD
4. cobra brake calipers assemblies , rotors, and pads SOLD
5. IRS cradle SOLD
6. sway bar and end links SOLD
7. both upper control arms SOLD
8. both lower control arms SOLD
9. 31 spline IRS pumpkin assembly with 3.55's SOLD
10. IRS knuckles with hubs and newer bearings SOLD
Hi, this is an '01 IRS unit which means it has 31 spline axles. i picked this up with broken spider gears and decided to fix it and sell it as an assembly . I went through disassembled complete unit and cleaned everything up and retorqued it all. I did also rebuild the pumpkin with a new spider gear set, 3.55 gears and some seals and bearings and filled it with fresh motorcraft 75w140 fluid & friction modifier. I machined the rotors, cleaned and lubed the caliper slides as well. It also has new wheel bearings with about 1k on them.
ALL items plus shipping
1. both 31 spline axles SOLD
2. both tie rod assemblies $50
3. both abs sensors SOLD
4. cobra brake calipers assemblies , rotors, and pads SOLD
5. IRS cradle SOLD
6. sway bar and end links SOLD
7. both upper control arms SOLD
8. both lower control arms SOLD
9. 31 spline IRS pumpkin assembly with 3.55's SOLD
10. IRS knuckles with hubs and newer bearings SOLD
Last edited: