Hey guys, so I found out that my drivers' side motor mount is completely broken and the passenger side isn't doing too hot either. Stock factory rubber at 200,000 miles....not surprised. I ordered the replacement mounts from AM and now have a question on the install. I have the support bar from harbor freight, and the shop manual I have says I need an engine lifting bracket. I gathered this myself since I saw nowhere particularly secure to attach the hoist to when I looked at the motor. The shop manual has two part numbers (303-D088, and D93P-6001-A2). Two part question:
1) Do I need this and if so, where to get it?
2) Is there one for each side of the motor? It looks in the pictures as if the bracket bolts to the drivers' side head below the valve cover but I can't tell if there is one for each side.
Thanks a lot!
1) Do I need this and if so, where to get it?
2) Is there one for each side of the motor? It looks in the pictures as if the bracket bolts to the drivers' side head below the valve cover but I can't tell if there is one for each side.
Thanks a lot!