I am having high pitched, demonic screeching coming from only my drivers side brembo. Here's the story to rule out some possible issues
Bought factory brembo setup used
Had rotors resurfaced before put on
Had brembos powder coated
Factory setup screeched bad, enough that I changed the pads/rotor
Put xtremestop slotted/drilled with hawk hps5.0
Did break in procedure (8-10 hard stops without drag)
Screech came back and worse.
Sanded the pads a little and put a bit more grease on the back of the pads
Screech is still present
Here are the rotor lines. Both sides actually look the same but the drivers side continue to be the only one making noise.
470rwhp Cornfed 5.0
Bought factory brembo setup used
Had rotors resurfaced before put on
Had brembos powder coated
Factory setup screeched bad, enough that I changed the pads/rotor
Put xtremestop slotted/drilled with hawk hps5.0
Did break in procedure (8-10 hard stops without drag)
Screech came back and worse.
Sanded the pads a little and put a bit more grease on the back of the pads
Screech is still present
Here are the rotor lines. Both sides actually look the same but the drivers side continue to be the only one making noise.
470rwhp Cornfed 5.0