NEW Best for my Auto NA GT on Corn..

nordy racer

Active Member
Established Member
Joined
Jan 24, 2006
Messages
1,190
Location
MD
NEW Best for my Auto NA GT tuned by RevAuto.

well the quest is completed.. thanks to Adam Browne and his team at Revauto. my 2012 GT 6r80 auto has hit 10's (4 times in a row) today at MIR track rental. it has been a long road to get to this ET. I was running high 11's on May 2013, to running 11.22 on Feb 2014 and now today 10.94 at 123mph..

race weight today was 3760 or so with me driving and the car was on E85 pump gas.
Rev Auto Tuned
Cobra Jet Manifold
SuperCobra Jet TB
Rev Auto 5in Cobra Jet CAI
JBA 1-7/8 longtubes
JBA 3in X
GT-500 Mufflers
1 Piece Driveshaft
Circle D 5c
3.31 ford racing gears
rear seat delete and aftermarket front seats.

Jason Miller had the track hooking and people were break parts but I was able to drive about 190 miles round trip and get on avg about 19mpg and keep the car in one piece. cant beat that :)

DSC05842_zps82571d53.jpg

10248856_10154011499430463_1066173844_n_zpsb63c3d6c.jpg

20mpg_zpsaea0caf2.jpg

allslips_zpse9d4564b.jpg

410sslips_zpscd8b941a.jpg
 
Last edited:

nicostang

New Member
Established Member
Joined
Oct 14, 2012
Messages
67
Location
Chatsworth, CA
Congrats!!!! It's insane how FAST and consistent your car is!

Are you using ET Street radial PRO? Are the welds 15x10? What RPM are you going thru the traps?
 

nordy racer

Active Member
Established Member
Joined
Jan 24, 2006
Messages
1,190
Location
MD
yup first time out on them and they hook great. I also lowered my control arms down so both those steps helped me with those 1.51 60fts.. Still trying to understand WHY she is not going below the 1.50 wall.. Yes they are 15x10 rear welds, and at the top end i'm trapping around 7560rpm..
 

davsta

All Motor
Established Member
Joined
Apr 1, 2010
Messages
27
Location
Jacksonville FL
yup first time out on them and they hook great. I also lowered my control arms down so both those steps helped me with those 1.51 60fts.. Still trying to understand WHY she is not going below the 1.50 wall.. Yes they are 15x10 rear welds, and at the top end i'm trapping around 7560rpm..

Congrats. Well deserved.
 

Rct851

Well-Known Member
Established Member
Joined
Dec 9, 2012
Messages
2,638
Location
Houston
Was the cobra jet intake the last step? If so, what did you run before that?
 

nordy racer

Active Member
Established Member
Joined
Jan 24, 2006
Messages
1,190
Location
MD
11.22 in my sign was with 4.30 gears and CJ intake.. new 10 times are with new 3.31 gears and E85.. went from 442rwhp on 93 to 460rwhp E85.

10252958_10154008891520463_425318276_o_zpsb8c1d6f3.jpg
 
Last edited:

KrisR

New Member
Established Member
Joined
Jun 2, 2013
Messages
222
Location
Wyoming, MN
Congrats man! I'm going tomorrow to the season opener at the local track. I don't expect it to hook very well tomorrow (they don't prep well at this event) but I'd like to see a 120mph trap.
 

92fiveohfox

Active Member
Established Member
Joined
Dec 4, 2009
Messages
1,097
Location
TX
Congrats man! What was the da like? Any oil pump gears or anything for longevity at high rpms?
 

Tuffnuts23

Member
Established Member
Joined
Jun 16, 2012
Messages
817
Location
Camarillo, CA
That is moving!! How the hell are you getting 20mpg on E85? Best I saw was 13 and with the current price of E85 in California, I had to switch back to 91.
 

Users who are viewing this thread



Top