Nitrous infor for the new 5.0

[King 5.0]

Been searching for some good info on dyno numbers and which kit is working well for others but haven't found much. Seems like everyone is GOing FI. I sold ny procharger and wanting to do a Nitrous set up. What power are theses cars making with spray.? Any info will help alot thank.

Btw i sold my procharger to help replace a rod.

Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

 

[BLK2012GT]

I have NX single nozzle on a 150 shot and made 570 rwhp and 512 rwtq.

 

[DTL]

It seems like everybody and their neighbor has a blower on their 5.0, but I haven't seen too many nitrous discussions. Not sure why, but that seems kind of backwards to me! I'd love to see a good review (or 2) of the NX plate setup.

 

[MOB 5.0]

would want to know the same OP. subscribed!

 

[Sof Top]

I have NX single nozzle on a 150 shot and made 570 rwhp and 512 rwtq.

Who tuned your car for the 150?

 

[ALLKHEINZ]

i ran 150,175,200 shots through my former 2011 5.0....went 10.66 on a 150 and 10.36 on the 200...best 60ft was 1.45...mods were basic weight reduction, LT headers,orx,gt500 mufflers,jlt cai,custom tune, 410 Gears,Racestar bigs/littles, 28" tall slicks...mine was a 2011 Auto Gt with the Glass Roof...I was using the NX Coyote 5.0 Plate Kit...car dynoed 377 rwhp N/A (11.77 best n/a) and on dyno with 150 shot it made 505rwhp and 525rwtq...numbers may seem down but it an Auto so will be leas compared to M6 5.0's...I just got the ZEX Coyote Kit for my 2013 and have yet to install it...went ZEX this time because of the shiatty customer service i got from NX when i developed a nitrous leak at the plate....they would not warranty a new plate so ill never be dealing with them again!!

Here is the 200 shot 10.36 Pass 1.45 60ft

1036Pass - YouTube

 

[Bud]

What size jet was used for the 200 shot?

 

[ALLKHEINZ]

im not sure but i called NX directly and theybsent me the proper 200hp jets...im not reccomending the 200 shot cuz its nerve racking to think if the bottom end would hold it...i only hit it the one time and then swapped back out to the 150 shot....

 

[Bud]

im not sure but i called NX directly and theybsent me the proper 200hp jets...im not reccomending the 200 shot cuz its nerve racking to think if the bottom end would hold it...i only hit it the one time and then swapped back out to the 150 shot....

My motor is getting built right now, was curious on the jet size as a class I want to run is limited to a 73 jet, and I think that is 175hp which isn't going to get it done for the times I need.

 

[Strpperpolef150]

I would never use nitrous express after all the faulty kits resulting in blown motors in my friends car. Nitrous Outlet is the only company I will use. Brand X is also a great budget brand.

 

[D.T.R]

I'm spraying a 100... but I want to up it a good amount...

 

[King 5.0]

I have fully forge iinternals. Do y'all think a 150-200 will hold up?

Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

 

[D.T.R]

I have fully forge iinternals. Do y'all think a 150-200 will hold up?

Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

fully forged internals should hold a lot more than that..

the transmission and drive shaft on the other hand... NOT SURE LOL

 

[sambandit]

I have fully forge iinternals. Do y'all think a 150-200 will hold up?

Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

No sweat with a built motor!

 

[ALLKHEINZ]

built motor sbould take it no problem but anything can break if the tune is off...if tune is on the money you should prolly be able to hit with 300 if u wanted....

 

[King 5.0]

I have a one piece drive shaft. So that's good. Im just trying to reach 570-600. I was pushing 600 with my Procharger.

Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

 

[Sof Top]

I would never use nitrous express after all the faulty kits resulting in blown motors in my friends car. Nitrous Outlet is the only company I will use. Brand X is also a great budget brand.

Nitrous Outlet FTW!!! They have qaulity products and excellent customer service. Also they make a SICK direct port for the Boss Intake.

 

[D.T.R]

I have a one piece drive shaft. So that's good. Im just trying to reach 570-600. I was pushing 600 with my Procharger.

Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

you should be able to get that with less than a 200 shot :beer:

 

[Strpperpolef150]

Nitrous Outlet FTW!!! They have qaulity products and excellent customer service. Also they make a SICK direct port for the Boss Intake.

I like this hidden direct port!
<a href="http://www.nitrousoutlet.com/gallery/photo.asp?id=698"><img src="http://www.nitrousoutlet.com/gallery/albums/107/96d91f6f80608be60b5c05439f1e9549_m.jpg" border="0"></a>

 

[AMWill]

I like this hidden direct port!

That hidden wet direct port setup is insane! I love the fuel/nitrous jet plumbing. Nitrous Outlet does a killer job on their nitrous setups. I agree with everyone who said 150-200 shot isn't a big deal on a built 5.0, especially, if you're running a safe direct port setup like this!

Shane