Post your Shelby GT500 Dyno Numbers in here

[Mustang_Racer]

My new Numbers: 605rwhp 589 tq
Steggy Ported Stock Eaton @ 15 psi, (2.6 upper, 10% lower), Steeda 113mm Mass/Cold Air Kit, Ford Racing Mufflers, Afco Heat Exchanger, NGK TR6 Plugs. 93 Octane tune by JMS

 

[magnum4000]

Whipple numbers

Just got my car back today from Lamotta Performance in Longwood, Florida. Whipple, lowering kit, single blade throttle body, injectors, etc. - all I can say is WOW. Check out the attached dyno. Couldn't really get on it on the way home - a light, misting drizzle prevented me from opening it up (and a trunk full of stock parts). The difference is AMAZING - going to the track next week.

For those interested, the lowering kit does create a mild vibration on startup and regular driving that you can feel in the frame. I drove another car setup like mine and I thought the vibration was from the seriously harsh exhaust on that car. Actually, I kind of like it - makes you realize the kind of power available. Very mild, nothing worth complaining about.

Many thanks to Jake Lamotta and his team - if you're anywhere near central Florida, he is the one to take your stang to, bar none. If you've taken your car elsewhere, and it still isn't right, Jake can fix what ails ya!

Anyone on the fence about doing it - just do it!!!:burnout:

Edit: It says I may NOT post attachments - so no dyno until I get that fixed. Any ideas?

 

[hydro]

My latest 2007 Shelby GT500 has 681rwhp over 700 torque on a Mustang Dyno.With the 11.5% correction factor as related to a Dynojet Dyno it now has 755rwhp
I have a TVS with ARH LT's,upper & Lower Pulleys TB,injectors,on 93 Oct Pump Gas.Have not raced yet with my current HP and Mods.hydro

 

[SICK SNAKE]

2008 shelby gt500 with KB 2.8 stage III and Magnaflow cat back made 655 RWHP and 600 TQ on pimp gas on 17 psi

 

[R1Lello]

665 rwhp for me, TVS, 160 Whipple monoblade, 10% Innovators West lower/stock upper......approx 15 psi, 93 tune

 

[hydro]

error

 

[Willie2]

my dyno vid:

[ame="http://videos.streetfire.net/video/Autograf-Shelby-GT500_201871.htm"]Autograf Shelby GT500 Dyno Tune- Video[/ame]

2.6 and JLT

540-550hp

 

[mustarrosa]

After 3.4 Whipple..725rwhp...100 degree Texas heat...pump gas...17lbs boost

Now here is a dyno on cold air day around 70 degrees
<a href="http://s136.photobucket.com/albums/q180/mustarrosa/?action=view&current=ColdAirDyno001.jpg" target="_blank"><img src="http://i136.photobucket.com/albums/q180/mustarrosa/ColdAirDyno001.jpg" border="0" alt="Cold air dyno"></a>

 

[mustarrosa]

After 3.4 Whipple..725rwhp...100 degree Texas heat...pump gas...17lbs boost

my new numbers on a cold day 70 degrees
http://s136.photobucket.com/albums/q180/mustarrosa/?action=view&current=ColdAirDyno001.jpg

 

[mustarrosa]

Here is a dyno of a friend's car. A GT500 modded with a 3.4 Whipple and 2.75 pulley on race gas. Also has American Racing long tubes, and 75 lb injectors with FRPP cold air and exhaust..New king of the dyno tuned by Manny at HPP
http://i136.photobucket.com/albums/q180/mustarrosa/Laddsdyno001.jpg

 

[Willie2]

my dyno vid:

Autograf Shelby GT500 Dyno Tune- Video

2.6 and JLT

540-550hp

retune...

2.6, JLT and forgot to mention full bassani exhaust. 560/550. thank you PSI Motorsports of Webster TX.

 

[mike5876]

711 hp 732 tq twin 61 mm turbos and the factory supercharger..all stock otherwise 16 lbs boost total

 

[EX1]

Afco HE, C&L intake, 2.6 pulley, JBA LTs and 3" o/r x pipe, 3" magnaflow catback. 558rwhp 574rwtq

 

[cheftjpeck]

I been missing in action as of late..this I know...Well, I already had the FRPP COLD AIR with The Pro Cal Ford Racding tune. I went to the greatest tuner in the world today in Justin Starkey at VMP tuning...we did the first run with the PRO CAL TUNE....good numbers...he said my stock numbers probably were around the 440 -450 point...which is good since the pro cal tune which is the first run came in at
Pro Cal tune with FRPP CAI: 483 rwhp and 475 torque at 10.47 max boost ran rich though

second run is the same setup with VMP Tune 517 rwhp and 502 torque at 11.40 max boost 11.7 a/f

3rd run was with the 2.65 pulley and 90 mm idler 544.94 rwhp and 546 max torque at 12.92 max boost and 11.7 a/f
car was starting to get warm wi9th the fla temps exceeding 75 degrees today....overall, I am very very happy...its like a new car and I have to relearn driving it all over again...THANK JUSTIN!!!!!!!!!! Sheet below

 

[shelbynate08]

Car made 824Rwhp and 798RWTQ on motor, well kenne bell

 

[sfadchi]

578HP 562TQ Mods listed in sig!

 

[snake_handler]

Run 1 was stock except for exhaust.
Run 006 was with Steeda Carbon Fiber CAI
Run 008 was with CAI and Steeda blower pulley with mail order tune.
I plan on going back and getting a custom tune to see if I can get more out of the combo!

 

[mustarrosa]

These are good numbers and expected with the mods you have. Yes, get a dyno custom tune.

 

[VegasShelby]

[ame="http://www.youtube.com/watch?v=JQ4am05DjoI"]YouTube - GT500 easy to mod, lots of powaaa![/ame]
Enjoy

 

[Steve's_Shelby]

Just got back from HPP performance with a new set of dyno #'s
545hp and 504ft lb torque with my new JLT CAI and magnaflow
exhaust. Manny is the man with his dyno tunes. Not a bad set of
initial mods ...