What did you tighten the nut with to get enough torque?
I didn't tighten to a specific torque value but rather tightened until the bushing bulged out far enough to (roughly) match the OD of the cup washer above it.
What did you tighten the nut with to get enough torque?
Has there been any new developments with any of this? Still very interested in the setup, and am getting tired of running them on full firm 24/7 :nonono:
If you ever want to go back to stock or sell off the car and get rid of the parts please pm me.
Has there been any new developments with any of this? Still very interested in the setup, and am getting tired of running them on full firm 24/7 :nonono:
If you ever want to go back to stock or sell off the car and get rid of the parts please pm me.
I had a controller made with a friend who owns an electronic shop, I need to pick it up , make a harness and wire it in... when I have som free time LOL, id like to see how comfy these are in comfort mode LOL
I purchased the car from Tob approximately a year ago. The system works well. Sport mode is rock hard lose dental fillings firm.... Comfort mode is still far from comfortable. However, though the ride is firm in comfort mode, it is noticeably softer than the sport mode. In both modes the car basically rides on rails. I am 49yrs old with 3 back surgeries-- so don't rag/abuse a car and certainly not one so much sweat equity was put into to make so nice... but have pushed it enough to know it stays planted in turns.
I love hearing that Harry. This was a great mod and as unique as you can get.
I think it’s a great mod for these types of cars. Especially if you have a sub box in the trunk and don’t want to keep a 13mm and a wrench on hand at all times to tune your suspension.My car has been gone for a few years now. I really did enjoy this mod. I don't see why you couldn't use all factory hardware. You may have to have a dealer do some programming if you couldn't find a way to do it yourself.
Will do. I appreciate the thread you have here, very thorough and informative.Factory harnesses should still be available from Ford but not for long...
For wiring just use a factory manual. Try contacting LEXiiON that posted up above. He may be in a much better position to give you advice here than me.
LEXiiON, do you know any details around if the shock connectors are able to be tracked down anywhere? I'm looking into upgrading my suspension to the damptronics. Any recommendations?Mine is very comfy in comfort mode. Maybe yours is a little firmer due to the Springs that Tob installed? I am running the stock springs, and I think if I remember correctly, Tob is using the FRPP ones. Nevertheless it is hands down the best mod!
LEXiiON
Connectors are almost impossible to get. Unless you get the body harness.LEXiiON, do you know any details around if the shock connectors are able to be tracked down anywhere? I'm looking into upgrading my suspension to the damptronics. Any recommendations?
I'm assuming getting a body harness isn't as simple as going to ford and asking for one? I've been trying to track down some wrecked ones and no dice so far.Connectors are almost impossible to get. Unless you get the body harness.
LEXiiON