[WTB] - Eaton Swap Parts

[Carbon Driven]

Thanks Paul.

Havent heard back from mach1gsxr yet

Working with BADASS03SVT on a possible deal, will know next week or so

Anything I have left out or forgotten? Getting even closer now.

 

[SLEEPERSTATUS]

i have a stock tb and pl perfect condition for 70 shipped to your door

 

[Carbon Driven]

Already have a plenuim and Im upgrading to a BF TB but thanks anyways

 

[Tremor]

This will give your Shelby a good run Robert.



-Jose

 

[Carbon Driven]

Perhaps, but the Shelby is getting a JLT CF Intake soon with an RET tune. Will give 60-90hp more and at least 500 rwhp. After that then no way.


Not 100% sure if I still need the "Emission EGR Related Bracket With Sensors" since Im going EGR delete?

 

[Tremor]

Perhaps, but the Shelby is getting a JLT CF Intake soon with an RET tune. Will give 60-90hp more and at least 500 rwhp. After that then no way.


Not 100% sure if I still need the "Emission EGR Related Bracket With Sensors" since Im going EGR delete?

Nice

You need to update your sig with a pic of the shelby.

Are you having Greg build your 01 motor for this swap ?

 

[Carbon Driven]

Bump

 

[Carbon Driven]

Only a few parts left, post up if you have any of them.

 

[Carbon Driven]

First two parts there seem like the same one.

I have the 4 parts listed above for 75 shipped. I will have to double check on the (6) studs/bolts, but i know I have about four of them for sure.

Archie

Water Pump Intercooler Bracket
Bypass Valve Actuator

How much for just the two parts?
They are in great working and looking condition?

Thanks

 

[Carbon Driven]

Got the MAF and good low price quote on some various small parts from Tousley Ford :beer:

Still would like to get those parts mach1gsxr. I sent a PM.

 

[Carbon Driven]

Added a couple of more parts to teh wanted list

 

[Carbon Driven]

Couple more parts pending purchase :woot:

 

[Carbon Driven]

Next item on the list: Heat Exchanger Brackets and Clamps!

Anyone?

 

[Carbon Driven]

Bump

 

[mach1gsxr]

• Heat Exchanger Bracket NEW
  * heat exchanger clamps NEW
• Intercooler Pump Wire Pigtail NEW
• Bracket with idler [it sits where alternator sits on N/A cars] NEW
• Intercooler Mounting Bracket NEW
• Bypass Valve Actuator (Pending)
• Alternator Wire Pigtail NEW
• 2R3Z3490AA - Power Steering Bracket
• 2R3Z-9N491-HA - Lower Intake Cooling Adapter NEW
• Lower Manifold to Intercooler Water Adapter
• Intercooler Pipe to Heat Exchanger
• Harmonic Balancer (will my 01 balancer work?)
• Complete Fuel Hat With Pumps And Sending Unit

Thanks

I hope this helps you out. It's a complete list from when I made a few of my swaps. You will need the 03/04 balancer. It's completely different than your stock one.

Alot of the parts on your needed list will be best if bought from ford. Saves you headache, hassle, shipping and even in some cases money over buying used. Trust me, I have done about 5 of these kits. Noted on your list above what to buy new. Not sure on what you mean intercooler pipe to h/e.

Heres a link to some good pics from ford and to some other links. One is a writeup that I did on it as well. [ame="http://www.mach1registry.org/forums/showthread.php?t=71833"]Eaton Swap..... - 2003-04 Mach 1 Registry Owners Club[/ame]

2r3z6312baa - Crank pulley /Harmonic Balancer
f1az6378a - washer for balancer
f5rz6a340b - bolt for balancer
2r3z6312ba - Supercharger Crank drive pulley
2r3z10153ca - Bracket that replaces stk. alt. on 99-01 Cobra’s and 03/04 Mach 1’s (Comes w/ pulley below if bought used)
yw7z8678aa - pulley for above bracket
2r3z6b209bc - Pulley bridge assembly for S.C. (If bought new it comes with the bridge, 2 idlers and tensioner)
(8678B) Idler pulley,timing cover pass. side
yw7z8678aa - pulley on drivers side of timing cover
(6D080) Timing cover (if bought new, it comes w/ pulley on drivers side and tensioner)
s5az6700a - timing cover seal
(10A313) Upper alternator bracket
(10153) Lower alternator bracket
(10346) Alternator
1U2Z-14S411-TA Electrical connector (alt. to harmness )
(6B209A) Tensioner on timing cover
2r3z8260ab - Radiator hose
2r3z8a593ab - Radiator hose
2r3z8k576aa - Radiator hose
2r3z8548aa - Water cross over pipe
(6881) Cobra oil cooler adapter
(6A642) Cobra Oil cooler
2r3z9002aa - Cobra fuel tank (optional)
2r3z9h307ab - Cobra fuel pump (optional)
2r3z6f066aa - Eaton supercharger
2r3z9424bb - Lower intake
(6K775) Garrett factory intercooler
3U2Z-14S411-SSA IAT2 sensor connector
2r3z9n491ca - Intercooler hard lines that hug the block (If bought new, it comes w/ part # 9l443c)
(9N491A) Intercooler hard lines that come from the h/e
3r3z9l443aa - Intercooler line that goes from the i/c adapter to i/c res.
2r3z9l443ba - Intercooler line that goes from the i/c adapter to the hard lines that hug the block
2r3z9l443ca - Intercooler line that goes from the hard line against the block to i/c pump(included w/ the hard line that hugs the block if purchased new)
2r3z9l443da - Intercooler line that goes from hard line to hard line
2r3z9l443ea - Intercooler line that goes from hard line from h/e to i/c pump
2r3z9l443fa - Intercooler line that goes from hard line and connects to h/e
2r3z9l443ga - Intercooler line that goes from hard line and connects to h/e
f8yz8501aa - Ford / Bosche water pump for intercooler
2r3z8n500ac - Intercooler pump bracket
2r3z8k226aa - Factory heat exchanger
2r3z8a193aa - Heat exchanger mounting bracket
2r3z8c386aa - 2each bracket clamps for h/e
(9N491B) Lower manifold to intercooler water adapter
2r3z9a589ca - Plenum
(9B659) Intake tube from maf to t/b.
(9F715) IAC valve
2r3z9f593ba - Injectors
(6F089) Boost bypass actuator
2r3z9a825aa - Cruise control cable
2r3z9a758aa - Throttle cable
(9728) Throttle and cruise control cable mounting bracket
1l3z12b579aa - MAF
xw4z9d475ab - EGR valve
2r3z9d477ad - EGR tube
(6C324) PCV tubing
(9F479) Sensor on the back of the S/C
(9J432) Bracket for vacuum stuff on left side of the S/C
(9H465) Vacuum stuff
(9J459) Vacuum stuff
(9J460) Vacuum stuff
(9E498) Hose's or tube cluster of connectors for the vacuum parts above
e83z9f670a IAC gasket
2r3z6020aa - Timing cover gasket LH side
2r3z6020ba -Timing cover gasket middle
2r3z6020ca - Timing cover gasket RH side
2r3z9h486aa - Lower intake to S.C. gasket
2r3z9l437bb - Plenum to S/C gasket
e6az9d476b - EGR gasket
2r3z3490aa - Power steering resevoir bracket.
I/C resivoir tank
i/c pigtail
S/C 8 rib belt
inner acc. belt.
n804178s309 - (8) Nuts for plenum, coolant crossover and pulley bridge can be picked up at local auto parts store in help section.
n805164437 - (1) Bolt for pulley cage to timing cover.
n808102s437 - bolt that is used on the idlers and pulleys. Only need if you buy parts seperately. You will need a total of at least 6 of these.
n808920s437 - Pulley bridge bolts
n606677-s36 (4) Bolts to bolt the bracket clamps to the h/e bracket
N605909s437 - (4) bolts for the upper alt. bracket
n807274s437 (1) lower alt. bracket to alt bolt
n811313s431 (4) studs to bolt plenum to s/c
w506404s437 (10) i/c to s/c bolts

 

[Carbon Driven]

Thanks bro. Seen that thread before. Good stuff.

Bump

 

[Carbon Driven]

Bump

 

[notchstang92]

Just and FYI, don't buy the power steering res. bracket new from Ford, it lists at $298!! Also to I found out from Steve @ Tousley Ford that the Lightning blower belt tensioner is the same as the cobra one. Ford doens't sell the cobra one separate from the pulley bridge, but sells a bare bridge. Go figure.

I agree with the above post about buying some stuff new from Ford. Call Steve @ Tousley and he will get you all you need. My swap will be done by the weekend. Its not too bad to do as long as you have good diagrams showing you how to run things. It really goes together quick. Worst part was grinding the heads/knock sensor mounts. I was nervous.

 

[Carbon Driven]

Thanks. I have got some quotes so far from Mike at Tousley and placed a order for some misc stuff that I cant find.

Will be ordering more to complete my swap soon. Only a few more parts that I should be able to find. Then time to place the second order. :beer:

 

[Carbon Driven]

Bump