[WTB] - Eaton Swap Parts

[Carbon Driven]

I have been getting some parts already after not being able to find any complete or near complete swap kits. So I'm buying smaller groups of parts to complete my swap.

Parts needed still:

• P/S Hard line w/2 hoses
• Intercooler Pump Wire Pigtail (Ordering from Ford)
• 1U2Z-14S411-TA Alternator Wire Pigtail (Ordering from Ford)
• 9H465 - Vacuum stuff (May have, think these are egr stuff?)
• 9J459 - Vacuum stuff (May have, think these are egr stuff?)
• 9J460 - Vacuum stuff (May have, think these are egr stuff?)
• New Set Of Radiator Hoses (Ordering from Ford)
  • 2R3Z-8260-AB - Radiator hose
  • 2R3Z-8A593-AB - Radiator hose
  • 2R3Z-8K576-AA - Radiator hose
• 2R3Z-6020-AA - Timing cover gasket LH side (Ordering from Ford)
• 2R3Z-6020-BA -Timing cover gasket middle (Ordering from Ford)
• 2R3Z-6020-CA - Timing cover gasket RH side (Ordering from Ford)
• 2R3Z-9H486-AA - Lower intake to S.C. gasket (Ordering from Ford)
• 2R3Z-9L437-BB - Plenum to S/C gasket (Ordering from Ford)
• N804178S309 - (8) Nuts for plenum, coolant crossover and pulley bridge (Ordering from Ford)
• N805164437 - (1) Bolt for pulley cage to timing cover. (Ordering from Ford)
• N808102-S437 - (6) bolt that is used on the idlers and pulleys (Ordering from Ford)
• N808920-S437 - Pulley bridge bolts (Ordering from Ford)
• S5AZ6700A - timing cover seal (Ordering from Ford)
• S/C 8 rib belt (Buying new)
• inner acc. belt (Buying new)

Parts have:

• 2R3Z9002AA - Cobra Fuel Tank
• Fuel Sending Unit With Float
• 2R3Z-3490AA - Power Steering Resevoir Bracket
• Fuel Hat With Pumps
• 2R3Z9H307AB - Cobra Fuel Pumps
• 2R3Z-8N500-AC - Intercooler Pump Mounting Bracket
• (2) Heat Exchanger Bracket Clamps
• 6C324 - PCV tubing
• 9F715 - IAC Valve On Plenum
• E83Z9F670A - IAC Gasket
• 9E498 - Hose's or tube cluster of connectors for the vacuum stuff
• Stock Heat Exchanger
• Heat Exchanger Bracket
• 9H308 - (2) "S" shaped Heat Exchanger Hard Lines
• 2R3Z-9N491-HA - Lower Intake Cooling Adapter Gasket, (4) Bolts & (4) O-Ring Gaskets
• 2R3Z9A825AA - Cruise Control Cable
• N605909-S437 - (4) Bolts For the Upper Alt. Bracket
• (2) Bolts for Alternator Lower Bracket
• N807274-S437 - (2) Lower Alt. Bracket To Alt Bolt
• N806300-S431 - (10) Timing Cover Studs/Bolts
• N606677-S36 - (4) Heat Exchanger Bracket Clamp Screws
• (1) Intercooler Pump Bolt
• (1) Intercooler Pump Nut
• 03 Cobra Wing Wiring Harness
• EGR Delete Kit
• E6AZ9D476B - EGR gasket (Doing EGR Delete So Dont Need)
• 8678A - Bracket With Idler
• 2R3Z-9N491-HA - Lower Intake Cooling Adapter w/ (2) tubes
• Harmonic Balancer
• F1AZ6378A - Washer For Balancer
• F5RZ6A340B - Bolt For Balancer
• Bypass Valve Actuator
• Emission EGR Related Bracket With Sensors
• EGR Valve
• EGR Hose To Exhaust Manifold
• SCT BA-3000 MAF
• Heat Exchager Hard Lines
• Intercooler Pipe "hose" to Heat Exchanger
• Lower Pulley and Cage
• 10346 - Alternator
• Lower Intake PVC Plug With Hoses
• 10A313 - Upper Alternator Bracket
• 10153 - Lower Alternator Bracket
• Pulley Bridge Bracket Assembly With Idler Pulleys/Tensioner
• 6A642 - Oil Cooler
• Oil Cooler Adapter
• Intercooler Pump
• 2R3Z8548AA - Water Cross Over Pipe
• 2R3Z9A758AA - Throttle Cable
• 9F479 - Boost Sensor [IAT2]
• Timing Cover
• 2R3Z9424BB - Lower Intake Manifold
• Lower Intake Intercooler
• Eaton SC
• Plenium
• Injectors
• Fuel Rails
• Fuel Rail Bolts
• Throttle Body TPS
• (10) I/C to S/C bolts
• (10) Intake Bolts
• N811313-S431 - (4) Studs To Bolt Plenum To S/C

Upgrades / New purchases:

• Billetflow Idler Pulleys & SC Pulley (Pending)
• LFP Dual Pass HE (Pending)
• LFP IC Reservoir (Pending)
• PFAB Radiator Reservoir (Pending)
• Accufab Polished SB TB And Plenum
• JLT CF RAI

Im sure there are some parts missing that I will need but concentrating on these for now. Have anything post it up

Oh Im not always able to get online from work so pm's and posts may take ~1/2 to almost a day to respond.

Thanks

 

[Carbon Driven]

Bump!

 

[JASPERSVT]

I have a stock heat exchanger and lines in my garage...... Let me try and find it for you.. I would be glad to sell it to you.

 

[Carbon Driven]

Thanks but I may only need the hard lines as I have a stock HE for sale as Im going to go with the LFP DPHE.

What else you have in your garage?

 

[coolcobramatt]

where did you find the pfab stuff?

 

[Carbon Driven]

where did you find the pfab stuff?

PFAB Radiator Reservoir
Its a bit pricey ($240) but with all the Cantons cracking, its cheaper because its quality you dont have to replace.

Edit: The IC res is an LFP Reservoir, copy/paste type-o lol

 

[Carbon Driven]

Bump

 

[Bluecoyote5.0]

I have some extra h/e hard lines if you still need them.

 

[Carbon Driven]

I'll keep you in mind as I may have some coming as soon as I hear back

Thanks

Ps, found remanufactured alternators at AutoZone for ~$200 bucks! No shipping either
Its a little pricey but its a source I can use if one never materializes on the web.

 

[BADASS03SVT]

I do have the following things....ones in red Im pretty sure I have (maybe). all off my 03 Cobra. lemme know

Heat Exchager Hard Lines
Heat Exchanger Bracket
(2) Heat Exchanger Bracket Clamps
Intercooler Pump Wire Pigtail
Intercooler Mounting Bracket
Harmonic Balancer
2R3Z9A825AA - Cruise Control Cable


EGR Valve
EGR Hose To Exhaust Manifold
Emission EGR Related Bracket With Sensors

 

[GhostRiderblk]

cantwait to do mine

 

[my92gt]

gl

 

[mach1gsxr]

[*]Water Pump Intercooler Bracket
[*]Intercooler Mounting Bracket


[*]Bypass Valve Actuator
[*]Fuel Rails Bolts
[*]N806300-S431 - (6) Timing Cover Studs/Bolts
[*]EGR Valve

[Thanks

First two parts there seem like the same one.

I have the 4 parts listed above for 75 shipped. I will have to double check on the (6) studs/bolts, but i know I have about four of them for sure.

Archie

 

[wallie40]

Hey robert, you should of just bought my car instead. LOL.

Free bump for finding parts.

 

[Carbon Driven]

Sup Paul! Well I cant spend that much all at once but it would be cool to have it still lol. You did get your lower intake, right?

Getting real close to having a complete package soon


Probably do a teksid block and built bottom end before throwing on the parts




Thanks

 

[Carbon Driven]

First two parts there seem like the same one.

I have the 4 parts listed above for 75 shipped. I will have to double check on the (6) studs/bolts, but i know I have about four of them for sure.

Archie

Thanks. I think they may be the same too. Put my list together kinda quick.

Water Pump Intercooler Bracket
Bypass Valve Actuator
Fuel Rails Bolts
(6) Timing Cover Studs/Bolts

How much for these without the EGR? Your post shows 5 parts? May go straight to an egr delete.

 

[95SC]

Robert ,
fuel rail bolts are the same on N/A cobras so you can reuse yours.

 

[Carbon Driven]

Sweet, less to buy. I already verified my rails were the same as an 03 but wasnt sure about the bolts.

Thanks Derek

 

[Carbon Driven]

Bump

 

[wallie40]

I did get my lower intake, no worries.

I understand about spending the $$. GL finding all the parts that you need.

-Paul