I have been getting some parts already after not being able to find any complete or near complete swap kits. So I'm buying smaller groups of parts to complete my swap.
Parts needed still:
Parts have:
Upgrades / New purchases:
Im sure there are some parts missing that I will need but concentrating on these for now. Have anything post it up
Oh Im not always able to get online from work so pm's and posts may take ~1/2 to almost a day to respond.
Thanks
Parts needed still:
- P/S Hard line w/2 hoses
- Intercooler Pump Wire Pigtail (Ordering from Ford)
- 1U2Z-14S411-TA Alternator Wire Pigtail (Ordering from Ford)
- 9H465 - Vacuum stuff (May have, think these are egr stuff?)
- 9J459 - Vacuum stuff (May have, think these are egr stuff?)
- 9J460 - Vacuum stuff (May have, think these are egr stuff?)
- New Set Of Radiator Hoses (Ordering from Ford)
- 2R3Z-8260-AB - Radiator hose
- 2R3Z-8A593-AB - Radiator hose
- 2R3Z-8K576-AA - Radiator hose
- 2R3Z-6020-AA - Timing cover gasket LH side (Ordering from Ford)
- 2R3Z-6020-BA -Timing cover gasket middle (Ordering from Ford)
- 2R3Z-6020-CA - Timing cover gasket RH side (Ordering from Ford)
- 2R3Z-9H486-AA - Lower intake to S.C. gasket (Ordering from Ford)
- 2R3Z-9L437-BB - Plenum to S/C gasket (Ordering from Ford)
- N804178S309 - (8) Nuts for plenum, coolant crossover and pulley bridge (Ordering from Ford)
- N805164437 - (1) Bolt for pulley cage to timing cover. (Ordering from Ford)
- N808102-S437 - (6) bolt that is used on the idlers and pulleys (Ordering from Ford)
- N808920-S437 - Pulley bridge bolts (Ordering from Ford)
- S5AZ6700A - timing cover seal (Ordering from Ford)
- S/C 8 rib belt (Buying new)
- inner acc. belt (Buying new)
Parts have:
- 2R3Z9002AA - Cobra Fuel Tank
- Fuel Sending Unit With Float
- 2R3Z-3490AA - Power Steering Resevoir Bracket
- Fuel Hat With Pumps
- 2R3Z9H307AB - Cobra Fuel Pumps
- 2R3Z-8N500-AC - Intercooler Pump Mounting Bracket
- (2) Heat Exchanger Bracket Clamps
- 6C324 - PCV tubing
- 9F715 - IAC Valve On Plenum
- E83Z9F670A - IAC Gasket
- 9E498 - Hose's or tube cluster of connectors for the vacuum stuff
- Stock Heat Exchanger
- Heat Exchanger Bracket
- 9H308 - (2) "S" shaped Heat Exchanger Hard Lines
- 2R3Z-9N491-HA - Lower Intake Cooling Adapter Gasket, (4) Bolts & (4) O-Ring Gaskets
- 2R3Z9A825AA - Cruise Control Cable
- N605909-S437 - (4) Bolts For the Upper Alt. Bracket
- (2) Bolts for Alternator Lower Bracket
- N807274-S437 - (2) Lower Alt. Bracket To Alt Bolt
- N806300-S431 - (10) Timing Cover Studs/Bolts
- N606677-S36 - (4) Heat Exchanger Bracket Clamp Screws
- (1) Intercooler Pump Bolt
- (1) Intercooler Pump Nut
- 03 Cobra Wing Wiring Harness
- EGR Delete Kit
- E6AZ9D476B - EGR gasket (Doing EGR Delete So Dont Need)
- 8678A - Bracket With Idler
- 2R3Z-9N491-HA - Lower Intake Cooling Adapter w/ (2) tubes
- Harmonic Balancer
- F1AZ6378A - Washer For Balancer
- F5RZ6A340B - Bolt For Balancer
- Bypass Valve Actuator
- Emission EGR Related Bracket With Sensors
- EGR Valve
- EGR Hose To Exhaust Manifold
- SCT BA-3000 MAF
- Heat Exchager Hard Lines
- Intercooler Pipe "hose" to Heat Exchanger
- Lower Pulley and Cage
- 10346 - Alternator
- Lower Intake PVC Plug With Hoses
- 10A313 - Upper Alternator Bracket
- 10153 - Lower Alternator Bracket
- Pulley Bridge Bracket Assembly With Idler Pulleys/Tensioner
- 6A642 - Oil Cooler
- Oil Cooler Adapter
- Intercooler Pump
- 2R3Z8548AA - Water Cross Over Pipe
- 2R3Z9A758AA - Throttle Cable
- 9F479 - Boost Sensor [IAT2]
- Timing Cover
- 2R3Z9424BB - Lower Intake Manifold
- Lower Intake Intercooler
- Eaton SC
- Plenium
- Injectors
- Fuel Rails
- Fuel Rail Bolts
- Throttle Body TPS
- (10) I/C to S/C bolts
- (10) Intake Bolts
- N811313-S431 - (4) Studs To Bolt Plenum To S/C
Upgrades / New purchases:
- Billetflow Idler Pulleys & SC Pulley (Pending)
- LFP Dual Pass HE (Pending)
- LFP IC Reservoir (Pending)
- PFAB Radiator Reservoir (Pending)
- Accufab Polished SB TB And Plenum
- JLT CF RAI
Im sure there are some parts missing that I will need but concentrating on these for now. Have anything post it up
Oh Im not always able to get online from work so pm's and posts may take ~1/2 to almost a day to respond.
Thanks
Last edited: