Search results

  1. BLKXTC

    Clutch Noise From under my car!

    I have an 03 cobra with a stock quad and adj but does have a spec clutch. I noticed for the first time last night while i was moving it a noise from under the car when the clutch is released and engaging at low speeds in reverse and forward. Only really seems to happen at a certain pressure...
  2. BLKXTC

    315 nittos vs 315 MT et drag

    I know that the nittos dr will fit a 9 in stock rim but my question is will the MT fit as well. Wanted to go with MT but didnt like the look of the P275. Sorry if its a dumb question. I have used P275 MT in the past and had great experience with them. But i like the look of the 315 MT. Any help...
  3. BLKXTC

    ET Street Radial vs ET Street Radial II

    I want the look of a 315/35r17 and want a good drag tire too. ET street radial which i ran before were great at the track. But they only offer them in a 275/40r17. So do the ET street radial II hook just as good as the original? They do offer a 315/35r17 in the Radial II. Any help would be...
  4. BLKXTC

    Looking for a good tire for the track

    Im looking for a good sticky tire for the track to mount on my stock 17x9s. I have used MT drag radials in the past 275/40r17. What im looking for is a 315/35r17. I see that nittos are available. But i want to do MT again. I see that MT offers a street radial in 315/35r17. Has anyone had any...
  5. BLKXTC

    F/S 1998 Ford Contour 100k $2000.00

    SOLD!!!Im selling a 1998 Ford Contour. Beautiful inside and outside. Has 100k miles on it. Green SE. Power windows,door locks, mirrors. Loaded. New alpine type s speakers all the way around. New water pump, Valve cover gasket, Left front master switch, new brakes, new tires, new exhaust gasket...
  6. BLKXTC

    1987 Mustang LX 5.0 Mass Air Con TMTL

    Im selling a 1987 Mustang LX 5.0. 147k miles. Blue and black. The car has been converted over to a mass air. Car has also been converted over to 5 Lug with SN 95 wheels. Asking for $6,000.00 OBO Engine: Edlebrock Performer heads Comp Cam XE264HR (35-320-8) 1.7 roller rockers GT 40 upper...
  7. BLKXTC

    WTS/WTT 03 GSXR 1000 for Foxbody 5.0

    As the title says i would like to sell or trade my GSXR for a foxbody 5.0 or a 4x4 explorer or mountaineer. Im looking to sell outright for $5,000.00 obo If anyone is interested please let me know. Pics and info upon request. Thanks Mike. [email protected]
  8. BLKXTC

    2004 svt cobra coupe black 36k payoff

    Billetflow 2.76 pulley Diablo tuner AFCO Dual pass HE JLT RAI BBK Twin 65mm TB Fiore Adj Quad Ram Dual Friction Clutch Full Bassani Exhaust (Mid-length Headers,X with cats,Bassani Catback (Headers have stage 8 locking bolts with no leaks) IRS Brace Autometer Lunar Gauges (fuel...
  9. BLKXTC

    1994 mazda b2300 2wd 5speed

    1994 mazda b2300. 115k miles, New clutch kit, slave cyl, master cyl. Four new tires (bridgestone dueler a/t) Just had a fresh oil change. Great pickup now major body damage. Has a few scrathes. Gets great gas mileage. Must sell $2,200.00 obo Ask for Dennis (540)539-0982. Vehicle is located in...
  10. BLKXTC

    2004 Black Cobra Must Sell

    PAYOFF ONLY!!!!!!!!!Selling my 04 Cobra. Car has 34,193 miles on it and is blacked out. Must Sell need to buy a house. ASKING $21,000.00............ Mods: BF2.76 Diablo tune Afco Daul pass HE JLT RAI BBK Twin 65mm TB Fiore Adj quad. Ram Dual friction Clutch Full Bassani Mids,X with...
  11. BLKXTC

    Weld Pro Stars?

    I have an 04 cobra and I am looking to do Pro stars. Can anyone let me know what size combo to go with. Will be drag racing all the time looking to go bigs and skinnies.... Backspacing etc. Thank you all Dennis
  12. BLKXTC

    WTB daul pass Heat exchanger

    Im looking for a daul pass heat exchanger. Any brand as long as aftermarket. I have pay pal and ready to purchase..... Just trying to save a little cash for other mods.
  13. BLKXTC

    Happy Birthday Maynard

    Just wanted to say its Maynards Birthday today. Love TOOL and any projects he is involved with. Rock on My friend:rockon:
  14. BLKXTC

    Stage IV mods

    I have a stage IV and I am looking to do an install but need to know what else may be needed. Main question is can I just do a BAP or do I need 60lbs injectors as well? Can I do this with no lower pulley and or what other mods my be needed? Thank you all Dennis.
  15. BLKXTC

    QA1 struts with 3/4 cut coil ?

    I have just recently put my stock k-member back in my car with stock springs cut 3/4. I kept the c/c plates on the car as well as the 12 way qa1s but the problem is that the car now sits over top of the tires. I cant even drive the vehicle its way to low. Would that be due to the qa1 or did I...
  16. BLKXTC

    QA1 Coilover problem

    Its looks as though my upper caps for the coilovers are hitting my bolts under the car for the c/c plates when the suspension bottoms out. I have alot of noise and Im slowly getting things to quiet down please any help would be great. Thank you all Dennis
  17. BLKXTC

    AJE K-member

    Anyone running an AJE K-member in these cars? Having a problem with the lower control arms. It looks as though the poly bushings are breaking apart causing the control arms to move back and forth. Not happy with the way the control arms mount with two bolts. Its causing the bushings to press out...
  18. BLKXTC

    Pics of M/M caster camber plates

    Was wondering if anyone had any close up pictures of these particular plates. I have Upr's now but looking to change over and want to see the difference in mounting. Thank you all Dennis
  19. BLKXTC

    autolite 103 for tune

    Can I use 103 autolites for a 2.93 swap and diablo tune I see that it is a copper core is that good. I was told to go iridium?
  20. BLKXTC

    Coil-over ?

    Will my 175 lbs qa1 springs work with the MMCO-1 kit for the bilsteins. I dont want to have to buy new springs. The QA-1 shocks make to much noise and I am not happy with the product. Will the bilsteins work with the upr c/c plates? Im having all kinds of noise with my coilovers. Its so bad I...
  21. BLKXTC

    2003 oem lugnuts

    Im having a problem with the oem lugnut caps keep coming off I have bought 2 sets from ford and they keep doing the same thing. Looks ugly. Can anyone steer me in the right direction or have the same problem. Any help would be great. Dennis
  22. BLKXTC

    AEM Wideband?

    I have been told by several people that the best thing for my car would be a wideband kit. Does anybody have this installed or have any knowledge of this particular kit. Was told only go AEM. Any help would be great. Thank you all. Dennis
  23. BLKXTC

    Idler pulley? with 2.93

    Im about to put a 2.93 on my car with a diablo tuner. I was wondering if I should use an idler or not if so which is the best out for our cars. Any help would be great thanks.
  24. BLKXTC

    Solid Axle Kits

    I want to convert to solid axle but I do not know the best kit out there or do I just piece one together. I see that AMP Performance offers a kit part# Amp-RE9498 does anyone have any experience with this any help would be great. Does any one want to swap for my IRS? Thank you Dennis
  25. BLKXTC

    Gauging Interest 04 Black Cobra

    Im thinking of selling my 04 cobra black with chrommies. It has 27,xxx miles on it and is mint with minor chips and marks. I'm thinking of starting a new business so need to let this go sorry no pics but will get some up. I live in Northern Virginia. The mods are jlt cai, bbk twin 65 t.b. No...

Top