Not my car but the same kit that I have
Interesting..... Its a pic and it shows on my cpu. Here it is again
I'm unfortunately not seeing a pic in either Google Chrome or IE.
Ok I saved the pic to my photobucket and added it in my first post. Let me know if its working
I just read though this post again. Bruce, are you implying that there is a way to run your new 14" rotor with the Vintage Venom caliper by replacing the mounting bracket? If so, I would be interested in this. Just wanted to make sure.
I just read though this post again. Bruce, are you implying that there is a way to run your new 14" rotor with the Vintage Venom caliper by replacing the mounting bracket? If so, I would be interested in this. Just wanted to make sure.
This is my VV kit. Does this help?
I will say, I really never thought about the weight of the GT 500 rotor when I bought this kit. It really is enormous! What was Ford's reasoning for using such a massive rotor?
I will check. Maybe I can pull one of the wheels off and check the caliper. I will take pics and post them. From what I remember, the pistons are centered on the pad. I will confirm.
There unfortunately are not any casting number markings on the Brembo calipers that I have.
I have also been doing some research on the differences between the F-40 and F-50 Brembo calipers and I'm not having a lot of luck. According to what I've found, they both use the same brake pad.
From what I remember the pads I pulled out (which I still have) had even pad wear. Once I get back home I'll clean them up, take better pics and get to the bottom of it. I would love to run your upgraded rotors with my setup, even if i need to buy your brackets.