Project Pro-touring Fox (Ridetech Equipped)

BLKFOX

Active Member
Established Member
Joined
Apr 28, 2011
Messages
1,366
Location
Indiana
I've got the headers on, got the high amp alternator coming, and finishing up some wiring.

20150506_194105_zpsyywyga0s.gif


New MAF, I've got the base tune for the 36lb injectors...now, just to get it running and to the dyno...

20150507_115807_zps0ufdbcc2.gif


I've been playing with the new widebands, mocking up the Dakota Digital setup, and tucking everything away :D.

20150510_222511_zpsmqpnfprg.gif


20150506_205000_zps94jciu8w.gif


and drilling this 7/8" hole through the sheet metal was by far the scariest thing I've done for a while...

20150509_232210_zpsnvx6rjij.gif
 
Last edited:

BLKFOX

Active Member
Established Member
Joined
Apr 28, 2011
Messages
1,366
Location
Indiana
Looking good. Gotta take some videos when yout get this thing done.
Definitely, there will be plenty!
No doubt looking really good
Thank ya :D


I've been waiting for these to get here... It's like a little kid on Christmas! :rockon:

20150527_011158_zpsozqayzl9.gif


20150527_011556_zps3wupydhy.gif


These things are just a tad bit smaller than the stock wheels were... lol

20150527_011609_zpsszprc9vb.gif


and the rear stuff :D

20150527_010426_zps4ipb3abo.gif


20150527_010740_zpssdntb45x.gif
 

oldstv

Well-Known Member
Established Member
Premium Member
Joined
May 28, 2008
Messages
2,263
Location
thomasville ga
This is taking too long, I am dying to see this finished. But when it gets done it will be amazing!!!!
 

BLKFOX

Active Member
Established Member
Joined
Apr 28, 2011
Messages
1,366
Location
Indiana
This is taking too long, I am dying to see this finished. But when it gets done it will be amazing!!!!

Tell me about it! Haha, I'm extremely anxious right now. I haven't been able to concentrate on much more, recently. I just want it done!

and thanks alot :D
 

BLKFOX

Active Member
Established Member
Joined
Apr 28, 2011
Messages
1,366
Location
Indiana
Those are soooo nice!!


Thanks guys :D

While the brake booster is getting painted, I'm just messing with a few other things that need to be done. Last night, I was running wires through the firewall, tucking things away, splicing, etc... and I put the upper intake on, it's starting to look like an engine bay!

20150603_010148_zps2zjfgyyp.gif


20150603_010126_zpseb8dickc.gif


20150603_010137_zpss4x4gv4o.gif
 

crazycarlo

Well-Known Member
Established Member
Joined
Jul 31, 2005
Messages
6,116
Location
Savannah, GA
Damn that looks good man and Im so jealous of the brakes. That was one of the best things I did to my cobra was nice rotors and painted calipers.
 

BLKFOX

Active Member
Established Member
Joined
Apr 28, 2011
Messages
1,366
Location
Indiana
Cleared everything good, I mocked up the fender to see how everything looked and it's going to be tight but I don't think making them fit is going to be too big of an issue! I'm thinking a 265/35-18 is about as big as I'll be able to get on it at the moment, unless I flare the fenders a little bit (which isn't out of the question just yet :D).

20150615_200024_zps4xkkcspv.gif
 

Users who are viewing this thread



Top