They'll be a good number at msrp if you have pacients.
Where are you driving too? NorCal?
Where are you driving too? NorCal?
Last edited:
They'll be a good number at msrp if you have patients.
...
They'll be a good number at msrp if you have patients.
Where are you driving too? NorCal?
I really hope so - but folks seem to believe that the wheels are the limiting factor (despite them being available from FRP) and production won't be upped. My fear is that I will wait for the impossible-to-get "R", and miss the chance to get "standard" in the process.... But whatever - if it's gonna happen it will happen.Maybe Ford will see the demand for the R and increase production so those of us that want that one can get one for MSRP.
I really hope so - but folks seem to believe that the wheels are the limiting factor (despite them being available from FRP) and production won't be upped. My fear is that I will wait for the impossible-to-get "R", and miss the chance to get "standard" in the process.... But whatever - if it's gonna happen it will happen.
I was in love with the regular GT350 when it debuted. I just knew I was going to get one. Then they introduced the R. Now I don't think I can "settle" for a regular GT350 while knowing the R exists. Every time I'd get in it, I'd just be thinking about what could've been. And with the way my car is setup now, I have the sneaking suspicion that driving a base GT350 wouldn't be dramatically or dynamically different from what I already have. (Aside from steering feel, I guess, but a Boss 302S/R steering rack would probably remedy that.)
I have zero justification other than I just want one. I know the track guys are rolling their eyes at this, but whatever - at least I'd actually _drive_ mine and not make it a garage queen (which is where I'm betting 90% of those selling for $10k+ ADMs are heading).... I have a 600 RWHP GT that's "built" from top to bottom with over 60 grand in it (over like 7 years) - because that's what I built..... people think I'm nuts because I don't track it. Just not my thing.I was in love with the regular GT350 when it debuted. I just knew I was going to get one. Then they introduced the R. Now I don't think I can "settle" for a regular GT350 while knowing the R exists.
Oh, is that how it works?They'll increase production to sell more cars and make more money.
Then please explain Ford only making 750 FGTs over a 3 year span?
Even one more would give me a better opportunity. I want one.More.
Not much, but more.
It's gonna be rough.
Oh, is that how it works?
Then please explain Ford only making 750 FGTs over a 3 year span?
Or only 300 00Rs.
Again, they won't increase production.
Believe me, I wish they'd make more too; I want one.How many 13-14 GR500s were made?
The new GT is probably constrained by its complexity, and by the qty Ford is sure they can sell.
GT350 Rs are most likely constrained by the wheels.
1993 Rs and 2000 Rs, you got me.
GT350 Rs are most likely constrained by the wheels.
By the middle to latter part of next year, the firm plans to begin low-volume production, initially at a rate of 6,000 wheels annually. Within a year, it hopes to get that up to 25,000. And with a few mainstream makers that could increase ten, even 100-fold.
Ultimately, “We’re focused not on 250,000 a year, but 2.5 million wheels a year,” says the Australian executive.
Carbon Revolution is by no means the only company toying with the new material. BMW and General Motors have both invested in firms that they hope will develop new production methods to sharply reduce the cost – while speeding up the process of producing carbon fiber components. The raw material isn’t cheap – costing dozens of times more, pound-for-pound, than aluminum. But it’s the largely manual labor needed to “lay up” carbon fiber where the real cost comes in.
The Porsche wheels, for example, require the assembly of about 100 separate pieces.
Dingle insists raw materials costs will come down as carbon fiber goes into more mainstream manufacturing applications. And there are clear signs that labor costs will drop, as well. Consider that when it built its F1 supercar a decade back, McLaren needed 1000 manhours for the carbon fiber chassis. That dropped to barely 100 hours on the Mercedes-McLaren SLR model, and is now down to little more than 10 hours on the new McLaren MP4-12C.
Five years out, Dingle forecasts Carbon Revolution could produce a typical CF wheel for as little as $250 – or $1,000 to $1,250 a set, depending on whether there’s a spare.
Rapid recent growth has resulted in a full pilot commercial production line currently capable of producing approximately 2,500 wheels per year.
Although elements of the current process remain relatively labour intensive, the ongoing development of bespoke process automation solutions is resulting in a steady increase in production capacity and providing opportunities for additions to the IP portfolio.
Construction has recently commenced on a full scale facility capable of producing 50,000 wheels per year with the capacity to expand to 250,000 wheels in the future as demand increases.
Carbon Revolution won a production contract with an overseas manufacturer in 2013, and negotiations are well progressed on further programs with original equipment manufacturers based in Europe. This facility is anticipated to service major vehicle manufacturer contracts as well as aftermarket sales to numerous offshore markets.
The CR-9 wheel is currently available for the Porsche 911, the Lamborghini Gallardo and the Audi R8. More fitments (starting with the BMW M3) are planned for the near future.
When at full capacity, this facility will have capacity for commercial scale production of 50,000 carbon fibre wheels a year for supply to the automotive industry.
They'll be a good number at msrp if you have pacients.
...
...
So 50,000 sounds like the magic number. That's enough wheels for 12,500 vehicles. Hopefully they are ramping up fast.