Recent content by Black03COBRA

Well, to start off, i was wondering what you guys think about this mod. for spring.... I already have a 2.77 upper interchangable pulley with idler pullies from BilletFlow. I want to get the 6 and 8lb interchangable lower pullies for more boost. I was wondering if i need to change the...

I want to install a lower 6 pound pulley in addition to my 2.77 upper. Do i need a bigger upper? and what size alt. pulley, if i need one? also, what size belt? i also want to add that i have the billet flow idler pulleys installed as of now with the stock belt . thanks

I want to install a lower 6 pound pulley in addition to my 2.77 upper. Do i need a bigger upper? and what size alt. pulley, if i need one? also, what size belt? i also want to add that i have the billet flow idler pulleys installed as of now with the stock belt . thanks

I was wondering if any of you know where i can order some of the annversary cobras calipers? Or does anyone know the part # . I hope i can, im sick of looking at mine in the conidtion they are. Thanks. Black0three :coolman:

I finally got a chance to take her to the track hoping to get into the 11s. I was trapping 117 in the quarter mile and the best i could do was 12.6. Every single run had a 2.3* sixty foot on drag radials! i just obviously cannot launch the damn thing. With the mods i have a 12.6 is just...

I think my next mod i want to do is a lower pulley swap. i currently have a 2.77 upper and the billtet flow idler set up. i want to run the 4 pound lower with this upper? is that possible or do i need a bigger upper? also i was wondering if im going to need to change the alternator...

yesteday i just had my Nittos put on. I went with the 275/40 Nitto Extreme Drag radials on my stock 17x9. well, they werent kidding when they said u can finally feel second are first now. i took it out and tested them where i normally would spin, they hook like there is no tommorrow. i didnt...

Anyone out there with the Diablo Flip chip!? I am going to be ordering my NO2 soon and i would like to have the car set up so i can drive it in different tunes. I know they have three tunes yuo can burn on the chip ( Stock, Tune 1, Tune 2 < NO2>). What do you guys think about the flip...

I was cruising down Telegraph ( major 3-4 lane street) the other night when i decided i had to merge over so i gave it a little gas. I was at about 50-55 MPH. I see a red light a little bit ahead, so i decided to save my clean rims and brakes by letting it coast for a little. But a few seconds...

Well, i recently decided my next mod. Nitrous. I do not know too much about it, so i have some questions to those who have experience with it on their car or in general. I saw the Edlebrock kit for our cars? Any good? What about ZEX? Any info or help of how safe what shots are...

Well i got my tints done yesterdat afternoon and all i gotta say is BUSTO! it looks a hell of a lot meaner, especially on black. I went with Limo (7%) in the rear, Limo ( 7%) on the 1/4 windows, and 35% on the passanger and driver side windows. They did a GREAT job. The DOT Matrix is a...

Ok, well i have the interchangable Upper pulley set and i put the 2.77 back on. I go to put the Gatorback 735 back on and it will not go on. WHY? i put the 745 on for now just so i can drive it but it slips bad! Is this the right belt? Is there something i am not doing or doing wrong!?! i did it...

To those with the Bassani O/R X Pipe and Cat-Back: Does it sound at all raspy to you? If so how bad? I am just about to order the whole system. I guess the gazillion people who said Bassani all the way might have had somehting to do with it...oh and that huge leak coming from my...

Today i finally fixed the damn exhuast for the about 5th time. The ProChamber doesnt like to come in contact where the left exhuast manifold and left side if the pipe connect. So the result: $hitty air (leak) sound. Solution: New exhuast system. Problem is this is what i want and i...

Every 1000 miles or so, the ehaust leaks on the left side where the hpipe and the left header meat. its starting to become a big pain in the arse ! i think im just going to get the bassani x pipe and catback. im tired of this....what could be the prpblem! anyone want a prochamber ?!?