Recent content by StillIntense

I'm fixing to break something here. While on track in the past, I've noticed that the passenger side A arm gets oil covered while on the track. Finally figured out that while at high rpms, the passenger side fitting on the oil cooler (where the hose connects) was leaking, dripping down, and...

Gentlemen, For those with the original 95R parts lists: is the 95R alternator an F5ZV (95 Cobra R) unique part? If it is 95R unique, what is the part number? Or is it the same as the 95 Cobra/GT? Need to get this thing back on the track soon and the alternator is dying. Need to get a...

Experts: need your experience again. Last spring, I replaced the fuel cell in my 95R. Along with the new cell, put in a new 190LPH pump, new filter, and new pressure regulator (Ford stock). Ran great, no problems and had it on the track late spring with no problems. Recently, I took it...

Ordered one on January 2d, 105907 are the last six of the VIN. Was told by the dealership that they were due in April. Dealership has "TBD" for everything after the buck date (March 30th). Called Ford customer care, they were helpful but gave the same answer. So far all the car magazines...

As the title asks: are the factory axles on a 95R 28 or 31 splines? Tried search, no luck. Need to get a Torsen in this thing......

If you ordered a 2010 GT500 already, you should be able to see your window sticker! It's great to confirm options, and actually "see" your car for the first time. Here's the website: http://services.forddirect.fordvehicles.com/inventory/WindowSticker.pdf?vin= Just type in your VIN after...

Just talked to my dealer. VVS is saying the order was released to the plant on 12 March and the build date for the first run of customer cars is on Monday, the 23d (as many of us have already heard). They are saying that once Monday is over, they'll be able to see the release/gate dates and...

Tried the search on this a few times with no luck. Can I fit a 315 width Nitto NT-01 on the rear of a 95R? Really having a tough time on track with the 255s (pretty loose). Don't want to do any mods to the rear to get them to fit. Will use a 10.5" rear wheel made for Mustangs. Or is a 275...

As the title says, just received my VIN from the dealership. They are telling me that it has been released to the plant. Expected delivery date of late March/early April has so far remain unchanged. Have a friend on the assembly line; he has the VIN and will keep me informed. It is a Grabber...

Probably one of the best complete package Terminators that you'll ever see! Original owner 6108 miles; 560hp/520 ft/lbs at the wheels! Never raced, wrecked or abused, always stored in a climate controlled garage; has never seen a wet road (literally) and has only been washed once, when I...

Probably one of the best complete package Terminators that you'll ever see! Original owner 6108 miles; 560hp/520 ft/lbs at the wheels! Never raced, wrecked or abused, always stored in a climate controlled garage; has never seen a wet road (literally) and has only been washed once, when I...

OK, so the last two times that I have had my 95R on track, it has exhibited an oil leak. It only happens while on track, never on the street. It is only occurring while at high speed/revs on the track, and is not happening while in the paddock, either before or after a session. The vast...

Well, the problem that has been discussed a good bit in a previous thread continues. Car still slow to build pressure, hard to start, surges at idle, runs decent once warmed up and will go to full throttle. Only thing changed originally was a new fuel safe cell. Have replaced fuel filter...

What is the rating for the factory pump in the 95R? Is it 110 LPH or more?

Need some advice here. Recently, I replaced the original fuel cell in my 95 R with a brand new one from Fuel Safe. Transferred over the fuel pump, fuel level sender, all lines and electrical connections without a problem. Put the new cell in the car. Now I have to crank the car for a good bit...