Ford racing injectors with new o rings. Maf is brand new. Pro m 75 mm. 300 obo plus shipping. PayPal only if shipping. Best way to get ahold of me is to text 402 992 222nine. Can't upload pics on my phone ask if you want pics just text
Roughly 30k miles on them and work great, only reason I'm selling bc I'm going bigger. Ported and valve job. Doesn't come with rockers but comes with ARP bolts (lost one unfortunately)
800 obo plus shipping
Text me at 402 992 2229
With my car being sold in the near future I was starting to look at build combos and was wondering what dyno numbers and track numbers everyone was doing and what combo you ran. I may have a clean, stock 185k mile notch to start with so im really debating on just building a 347 and throwing...
Hey guys been reallly thinking about selling my 94 and finally stubbled across a fox that i fell in love with. Ive owned the car for almost 3 years. I bought the car already 98 Cobra swapped but I forged the motor after a piston went. Body of the car has somewhere around 100K miles, theres no...
Didnt know really where to put this that itd get alot of traffic bc im stumped and really could use some insight.
Noise started with a knock in the rear when I would put it in gear at a low RPM and deaccelartion while still in gear. If the car was jacked up and I moved the tire back and forth...
Im selling my polished discharge pipe from a v1 kit. It also includes the intake tube to the motor. Fits 96-98 cobras, in great shape.
$150 plus shipping. Paypal please
Didn't know if this was quite the right section but i figured my answer would be found anyways.
I bought a lc1 wideband and it worked correctly for a bit than pinned on 21.9. Than the led light was flashing 5x, error 5. So I rewired it and did the correct install. When i was waiting for the...
Hey guys im trying to figure out if I need to get a smaller pulley before I dyno or not. Ideally id like to run 10 psi or higher. Last time it was a v1 w a 3.6 pulley on a 97 Cobra motor. This year it has c heads, LTs, IC, and a anderson power pipe. Essentially its a bolt on Mach 1. Running the...
Im switching to e85 and need 80#s. They are Siemens injectors. I bought these w/ 500 miles on them and have maybe put 100 on them since. I had these flow tested right after I purchased these and everthing matched. Looking to get 350 shipped obo.
Jus got my car built and am ready for a dyno tune and than I got a good deal on a 340lph. So im thinking about e85 and a 91 tune. My motor is a forged c head 4.6 w a v1 @ 10 psi and an intercooler. Im at 10:1 compression. My fuel system is stock rails and lines w 60s and a 340 and a bap. Is that...
All parts are OBO and plus shipping. let me know if you need pics
Springs and retainers-25
03/04 Cobra cams-25
black cam covers-SOLD
3.27 gears for an 8.8-20
NEW Fel Pro Gasket Set-SOLD
Includes: head gaskets
timing cover gaskets
TB gaskets
intake valve stem
header...
hey guys on our local street forum there's a handful of gtp guys who believe in "11sfor2k" bc someone on a gp forum did it. Now one guys ran a 12.0X this past fall with spending right at 2k. After watching some vids and seeing some ponys on here run good times w. few mods it got me thinking...
hey guys im looking to pick up an Anderson Powerpipe for a 96-98 cobra that would connect from my maf in the wheel well to the inlet of my vortech. Im paypal ready and looking for one quick. Let me know if you have anything thanks.
I did a C head swap on my 94 GT and in the process I have one mystery connection, thankfully only one. Anyways I went from B to C heads and im thinking it has something to do w/ egr but not sure. Its located by the firewall. Help me out please
I'm on the fence on selling my 94 mustang. I bought the car fully 97 Cobra swapped with a V1 and unfortunetly a piston went out on me due to running lean. Things have been pilling up these days and my luck isnt swinging my way on the car so I think its time to let it go. The motor is in the car...
I'm on the fence on selling my 94 mustang. I bought the car fully 97 Cobra swapped with a V1 and unfortunetly a piston went out on me due to running lean. Things have been pilling up these days and my luck isnt swinging my way on the car so I think its time to let it go. The motor is in the...
looking for a O/R H pipe that fits my BBK LTs. Its for a 96-98 car if that makes a difference. Let me know what you have im paypal ready and am located at 68701
thanks
I switched from B to C heads on my 4.6 and i plan on running my stock fuel rails. Im trying to figure out the best way to do this and was wondering if any of you have and if so if you could post pics for some references. Now i know that i need to widen them to fit around the mach 1 intake and...
I pulled my 97 Cobra B heads apart this week and am putting everthing up for sale. All prices are OBO and do not include shipping. Package deals will get price cuts. Motor had 40k miles on it and all parts are in amazing shape, would use again but switched to complete C heads.
Includes...