Imagine Coyotes
Bodie Stroud built a custom ’67 Mustang for the singer of Imagine Dragons
By Steve Turner
Photos courtesy of Bodie Stroud Industries
Coyote swaps are all the rage and a classic Mustang is one of the coolest vessels for a modern 5.0-liter swap. Of course if you are a rock...
Super Sleeper
VMP Performance boosts and tunes a new Ford F-150 with great results
By Steve Turner
Photos by Steve Turner and courtesy of VMP Performance
During the NMRA season opener in Bradenton, Florida, the event announcers were blown away as VMP Performance’s Brad Marsh piloted the...
New member here, I have some questions from what ya'll have read/experienced with driveline components as far as power limits. I ask because I'm picking up a new 16 gt this Saturday. The catch is its going to have the roush supercharger kit with the phase 2 upgrade, aside from that the car will...
Little Fighter
ProCharger turns the latest six-cylinder Mustang into a real performer
By Steve Turner
Photos by Erik Radzins/ProCharger
We live in wonderful times. The Ford world is brimming with performance options from the sharp Fiesta ST to the superstar Ford GT. In the world of...
Currently have a Vortech JT and its just not enough and its time to upgrade. Aiming for the 1,000rwhp-1,500 range and was leaning toward a twin setup but then after talking to some people I started looking into a F1R or other similar head units. Which would be better, any pros or cons of each...
let me start off by saying hey to everyone. been on this forum for a while but been more of a looker than a poster. Well I am now starting a project of my own and need some guidance. I am currently building a airboat and gonna use the 15 model coyote crate engine for the power plant. Buying the...
FS: 2015 Roush supercharged Mustang gt premium-photos added
Hello everyone, I have a 2015 Mustang gt premium with Roush supercharger kit (rated at 670 hp). The car has around 4700 miles. Also has Ford racing performance suspension, MBRP cat back exhaust, forgestar rims with MT street comp...
I am looking for a supercharger, twin turbo, procharger kit or an airlift kit for my car. I have a really nice bike that i am looking to trade . 2004 Gsxr . located in Maryland. Text me if interested 443 945 4376
Like New Vortech V-3 Si Centri Kit
I'm selling my Like New Vortech V-3 Si Centri Kit. It only has about 100mi on it or less. I installed it about a month ago and haven't even had the car tuned yet. The car is set to an extremely safe start tune with a rev limiter set to 4k so the SC hasn't even...
2007-2012 Shelby GT500 2.8 L/C kenne bell supercharger kit for sale.
The kit was installed on 2011 Shelby GT500 . The compressor was sent back to kenne bell and rebuilt so supercharger is a fresh build. The by pass valve is also brand new . I'm upgrading to a bigger kit so It's gotta go...
I've got a 97 cobra, I am trying to figure out what supercharger I should go with.. From my own research it seems vortech is the way to go but it's expensive for a new kit and used ones are hard to find plus don't know how I feel about buying one used...so I'm thinking about doing a kenne bell...
Used approx 500 miles. Price includes 2.8" & 2.4" pulleys and shipping. Also available Metco double bearing 90mm idler and bracket for add'l $150.
http://www.svtperformance.com/2014/0...nity-tvs-test/
Serious interests, contact me directly via email [email protected]
Used approx 500 miles. Price includes 2.8" & 2.4" pulleys and shipping. Also available Metco double bearing 90mm idler and bracket for add'l $150.
http://www.svtperformance.com/2014/06/23/tech-vmp-gen2-vs-trinity-tvs-test/
Serious interests, contact me directly via PM
This is my first post so excuse me for any errors, these forums have helped me a lot but now I guess it's time to post for myself.
I'm putting my car back together but have taken a hold for deployment so I'm looking at new options. I have already 9.6:1 compression CP pistons. I have a Fore...
VMP pulley puller tool $75.00 + shipping cost
email me at [email protected] if interested or reply to this thread. Middle TN area if you would prefer picking up.
REDUCED - For sale factory 2011 GT500 eaton supercharger with about 20K at time of removal along with factory elbow,throttle body, injectors, and heat exchanger. Supercharger currently has the VMP 2.5 pulley already installed on the snout and will come with factory pulley as well. $600 obo...
I am in search of a kenne bell mammoth supercharger kit. 2.8 Polished . Post up what you got and your price. I am located in California. A regular 2.8 in polished would work too.
Hey yall.
I have a 2001 SVT Cobra. It has simple bolt ons, so pretty much stock really. Here are my questions in regards to installing a supercharger:
-What supercharger would you recommend installing?
-What are ALL the components/parts needed to install this?
-What are some other upgrades...
I've decided to sell my cobra, so the supercharger will have to go. I'm not exactly sure on the mileage of the supercharger, but it has 15k on it since the port from Stiegemeier.
I bought this from someone on here 2 or 3 months ago who had just returned his car back to stock. The is one off...
This is my current daily driver for time being
Current mods
fender well cold air
steed short shifter
magna flow off road x-pipe
flowmaster cat-back
I would like to say that from those mods I would be close to about 450 rwhp but IT'S NOT ENOUGH!!!
I am going to order a supercharger pulley...
It is time to finally put my garage queen up for sale to another good home. I have owned this vehicle since May of 2003 and am the 2nd owner. I have all documentation for the vehicle. This car has been a casual Sunday driver its entire life.
Never seen the 1/4 mile! Just a fun little 400hp...
I bought a 1999 Lightning in early 2000 when the white ones were being produced. A year or two after that, I got a letter from SVT that made an intercooler update available if I wanted. I had it done, but the local Ford dealer was not too forth coming about just what they did.
Does anyone...
I am selling my stock supercharger that I pulled off of my 2012 GT500 a few years ago when I upgraded to my TVS. it has 3k miles or less on it and it includes the elbow and intake (including ford racing smooth intake or stock if you want that as well)
looking for $600 or best offer.
have...
Greetings: I saw no references to this when doing a search.
I was wondering if I could just run the smallest blower pulley and the biggest crankshaft pulley to get maximum boost from the blower. In this case a 210 Whipple that is capable of 30 PSI.
Then plumb in a regular Waste gate (like in...