EDP Turbo results

wakebum2507

EVLTWNS
Established Member
Joined
May 12, 2013
Messages
1,078
Location
oklahoma city
Verdict is in on the EDP turbo kit:

set up: EDP single, 7675.

I had Mike Murillo up in OKC on friday to tune the car. Its a built SB, single turbo car. Fuel via Fore innovations fuel system, 2 wally 465's, DW1500 injectors. Built MT82 (for now).

car made 939/904 on the mustang dyno at 15 LBS.

i'll get the graphs from him this week to post.

overall, pretty damn efficient.
 

92fiveohfox

Active Member
Established Member
Joined
Dec 4, 2009
Messages
1,097
Location
TX
Nice man! What rpm does it come on at? Is that maxed out?(I would assume it can do 20+?) How was the install, any issues?
 

wakebum2507

EVLTWNS
Established Member
Joined
May 12, 2013
Messages
1,078
Location
oklahoma city
the kit is far from maxed out, but this motor and trans probably is close. that's speculative, but probably accurate.

we were seeing boost around 3300, with full power coming in at like 3800 or 4000. i forget.

this was also thru the full exhaust. we are working on a cutout now, so that should net a little more.

we will see how restrictive these quad tipped borla S types are.
 

sspstangbanger

Pushrod Killer!
Established Member
Joined
Sep 11, 2009
Messages
593
Location
Plantersville, TX
Congrats those are nice numbers
I would worry about loosing my feet with a mt82 taking close to 1,000rwhp sitting in the trans tunnel below :)

All the turbo coyote guys know this to be true
0cc4d05d402455251027b5fa42c00b7a.jpg
 
Last edited:

Ultrakla$$ic

WhoFlungPoo
Established Member
Joined
Aug 16, 2010
Messages
1,870
Location
Louisiana
Is that a video of your car on their Facebook page???

I too would like to see pics of this setup in your engine bay.
 

Deerslayer

Member
Established Member
Joined
Dec 18, 2013
Messages
104
Location
ATX
Man, THAT IS A BEAUTIFUL setup. Really clean. Does your intake filter nose up to pull from the driver side hood vent?
Great numbers. I am impressed
 

PC03GT

Well-Known Member
Established Member
Joined
Sep 8, 2010
Messages
2,416
Location
delaware
Nice numbers. How was the install? Which kit did you go withthe entry-level or the complete kit?
 

SVTour99

Up and Coming SVT Poster
Established Member
Joined
Feb 17, 2003
Messages
790
Location
Ohio
Man this looks affordable. I've already got some ID1000's to boot. Thought I was ready to buy a VMP TVS, not so sure...
 

Users who are viewing this thread



Top