**** my ass.. I would really like to have been able to pick one of these kits up
**** my ass.. I would really like to have been able to pick one of these kits up
Ok everyone, don't freak out now! ;-)
We had our original 'special purchase' of these Brembo caliper sets and made up the first batch of kits. We expected them to be sold out by the end of 2013 and we thought they did sell out. However, we actually have one kit left because we were holding a kit for a customer without a deposit and then he ended up cancelling it. So at the present time, we actually have one street kit available for immediate delivery. If you want the HD road race version of the kit, you'd have to wait until we get rotor rings back from the plater which should be some time later next week.
We had so many happy customers and so much success with the first run of parts, we actually were able to nail down the ABSOLUTE last batch of calipers in existence at this special price. I originally didn't think we'd be able to get more but we were able to get the last ones. It's officially the end of the line. So that means we have another run of kits in the works right now. We should be able to start delivering from this second batch by sometime in April.
We absolutely cannot get any more calipers at these prices. That is the only item in this kit you won't be able to buy replacement parts for. You could go to Brembo to buy caliper rebuild kits if you'd ever need them. We will however have an ample supply of replacement brake pads, hardware, replacement hats, rotor rings, bobbins and attaching hardware.
So the good news is there are more kits in the works with one kit available immediately. If anyone has any questions I'd be happy to answer them for you.
:thumbsup::coolman::beer:
Ok everyone, don't freak out now! ;-)
We had our original 'special purchase' of these Brembo caliper sets and made up the first batch of kits. We expected them to be sold out by the end of 2013 and we thought they did sell out. However, we actually have one kit left because we were holding a kit for a customer without a deposit and then he ended up cancelling it. So at the present time, we actually have one street kit available for immediate delivery. If you want the HD road race version of the kit, you'd have to wait until we get rotor rings back from the plater which should be some time later next week.
We had so many happy customers and so much success with the first run of parts, we actually were able to nail down the ABSOLUTE last batch of calipers in existence at this special price. I originally didn't think we'd be able to get more but we were able to get the last ones. It's officially the end of the line. So that means we have another run of kits in the works right now. We should be able to start delivering from this second batch by sometime in April.
We absolutely cannot get any more calipers at these prices. That is the only item in this kit you won't be able to buy replacement parts for. You could go to Brembo to buy caliper rebuild kits if you'd ever need them. We will however have an ample supply of replacement brake pads, hardware, replacement hats, rotor rings, bobbins and attaching hardware.
So the good news is there are more kits in the works with one kit available immediately. If anyone has any questions I'd be happy to answer them for you.
:thumbsup::coolman::beer:
How much if we supply our own calipers? If we get rotors, brackets, lines, etc from ya?
Bruce, Is the hat from the street and road race the same? is it just the difference in rotors them selfs? The reason i ask is because i bought the street kit and later if i decide i want to buy the road race disk can i just install it onto my existing hats. Thanks
im still planning on getting a set. just wanted to make sure I have the money and then some first. how many sets do you have and exactly how much do I make the check out for?We have some good unexpected news. We were able to secure a few more sets of these bargain priced Brembo caliper sets. That's the good news. The bad news is this is the last of them. There are no more, this is it!
So if you have been contemplating on getting this kit, now would be the time to make your move. This is one of the best mods you could put on a Terminator.
We are extending the "Save 10% when paying with a check or money order" offer on these until they are gone. This saves us Pay-Pal and credit card fees and we pass that savings onto our customers.
I'd be happy to answer any questions you may have regarding the kit.
:thumbsup::coolman::beer:
im still planning on getting a set. just wanted to make sure I have the money and then some first. how many sets do you have and exactly how much do I make the check out for?
Hey Bruce,
Ever have any more miracles and find another set of calipers??
I saw on FB they were a few weeks from releasing a new SN95 kit...
Think it’s the wilwood kit
How does the Wilwood kit compare to my 14" F50 GT kit?Correct, we now have a four piston 14" Wilwood front brake kit that is available for SN-95 applications. Comes complete with caliper, lines, pads, one piece zinc plated rotors and caliper mounting brackets and hardware. The kit is going to retail for $1,395.00 plus shipping and we hope to have it on this page of our web site next week. 1999-2004 Cobra Brake Parts
Correct, we now have a four piston 14" Wilwood front brake kit that is available for SN-95 applications. Comes complete with caliper, lines, pads, one piece zinc plated rotors and caliper mounting brackets and hardware. The kit is going to retail for $1,395.00 plus shipping and we hope to have it on this page of our web site next week. 1999-2004 Cobra Brake Parts
Well the F-50 Brembo kit we used to offer is a top notch world class brake kit. They used those same calipers on the FR-500C and FR-500S Racing Mustangs in Grand Am, World Challenge and Continental Challenge. They were also quite expensive. The 14" kits from Brembo are in the $3,500.00 price range. We were able to offer them for approximately $1,000.00 less because we purchased the calipers at a great price and manufactured the balance of the kit ourselves.How does the Wilwood kit compare to my 14" F50 GT kit?
Sent from my VS988 using Tapatalk