dynobobstieg
New Member
*Edit* Stiegemeier Porting Only offers Stage I and Stage IV.
Stage I-Inlet side port matched, exit side enlarged--$295.00 30+HP
Stage II-Inlet side port matched, internal radiusing, polished, exit side enlarged.--$395.00 40+HP
Stage III-Welded case, Inlet side Max ported and polished, exit side enlarged.--$495.00 50+HP
Stage IV-Welded case, Inlet side Max ported and polished, exit side enlarged-New Design that addresses Torque Loss -We are seeing 15+ rwhp peak Torque gain along with a top end Torque increase equal to the HP gain--$495.00 55+HP 15+Peak TQ
New Design entails a Great amount of Hand Crafted Precise Porting.
We are offering this New Stage IV at Stage III Price thru the end of 2005 --Expect a 10% Price increase in 2006 on the Stage IV Only.
Throttle Body and Plenum Ported.
The Plenum is welded extensively on all 3 surface low areas they are hand crafted smooth then painted.
Internally they are Max Ported and Polished +10 HP
The Throttle Body is Fully Radius and Polished +2 HP
It has taken 2 1/2 years and 1300 units to get to this point and I believe the progress Can Continue with HARD Work. Many Small Improvements are needed to Claim a Stage Increase. We average a 1 HP Per month advancement at this Point. We have Many Ideas to try in 2006. Always Remember Even a Failed Test IS -TEACHING Us Something.
I have Personally Hand Crafted over 3500 hard core racing heads along with 1500 Intake Manifolds-Numerous Carb Spacer Designs and had a very sucessful Carburator business-We worked for all Major Racing Teams over the past 25 years-the last notable effort was for Carl Edwards. Then we started Porting Superchargers and here we are today December of 2005-Thanks For All of Your Support! AS ALWAYS SATISFACTION GUARANTEED!
Merry Christmas and Happy New Year.
Robert Stiegemeier
aka Dyno Bob
2006 Design
Stage I-Inlet side port matched, exit side enlarged--$295.00 30+HP
Stage II-Inlet side port matched, internal radiusing, polished, exit side enlarged.--$395.00 40+HP
Stage III-Welded case, Inlet side Max ported and polished, exit side enlarged.--$495.00 50+HP
Stage IV-Welded case, Inlet side Max ported and polished, exit side enlarged-New Design that addresses Torque Loss -We are seeing 15+ rwhp peak Torque gain along with a top end Torque increase equal to the HP gain--$495.00 55+HP 15+Peak TQ
New Design entails a Great amount of Hand Crafted Precise Porting.
We are offering this New Stage IV at Stage III Price thru the end of 2005 --Expect a 10% Price increase in 2006 on the Stage IV Only.
Throttle Body and Plenum Ported.
The Plenum is welded extensively on all 3 surface low areas they are hand crafted smooth then painted.
Internally they are Max Ported and Polished +10 HP
The Throttle Body is Fully Radius and Polished +2 HP
It has taken 2 1/2 years and 1300 units to get to this point and I believe the progress Can Continue with HARD Work. Many Small Improvements are needed to Claim a Stage Increase. We average a 1 HP Per month advancement at this Point. We have Many Ideas to try in 2006. Always Remember Even a Failed Test IS -TEACHING Us Something.
I have Personally Hand Crafted over 3500 hard core racing heads along with 1500 Intake Manifolds-Numerous Carb Spacer Designs and had a very sucessful Carburator business-We worked for all Major Racing Teams over the past 25 years-the last notable effort was for Carl Edwards. Then we started Porting Superchargers and here we are today December of 2005-Thanks For All of Your Support! AS ALWAYS SATISFACTION GUARANTEED!
Merry Christmas and Happy New Year.
Robert Stiegemeier
aka Dyno Bob
2006 Design
Last edited by a moderator: