I thought you decided to keep your 4.56. Are you again thinking about or wanting a taller gear?
Never said it was...in fact I said I got that gear was for procharger that I had in mind.3.73 N/A just isnt enough gear for the 96-01 cobras. 410+. 96-98 need 430-456.
Is the B head that much more doggy than the c head at the lower rpms?
Ok.Yes, it sure is.
4.30 for 96-98 4V
4.10 for 99/01 4V
Never said it was...in fact I said I got that gear was for procharger that I had in mind.
I said 4.10 seemed about right for NA
Not sure why you think 4.30 is needed for the sn95.
Is the B head that much more doggy than the c head at the lower rpms?
Also OP wants a 1st gear that is not useless.
I was going to. But it’s just so much gear to drive in LA. I’ve had Fox body’s with 410-411 and they didn’t seem this bad. It’s literally feeling like the car is maxing out all the time. I’m a experienced driver and had many 10 second cars that were street able ( about 8-9 of them ) None of them felt like this. As for the taller tire I’m running 18” wheels with 40 series tires. I don’t want a taller tire. Don’t like that look on these cars.I thought you decided to keep your 4.56. Are you again thinking about or wanting a taller gear?
It's gears, not a boob job.Put your skirt on, grab your purse, and put 3.73s in it.
I am 6'5 300LBS around 10% BF I doubt I would look good in a skirt! LMAO!!!Put your skirt on, grab your purse, and put 3.73s in it.
I think motive makes the ford oem gears.What brand 4.30s are you guys running, since FRPP are not available? I can't decide between Motive Performance Plus and Nitro.
Yeah I read that. It's like you have to be a detective to figure out where the gears are made and who actually makes them.I think motive makes the ford oem gears.
Also USA GEAR and RichmondYeah I read that. It's like you have to be a detective to figure out where the gears are made and who actually makes them.
Many, many years ago when it was NA and had 4.30's, the car ran on 305/35-17 drag radials.What size wheels and tires are all of you 4.30 guys running? Not to hijack the thread; but I think it's relevant when recommending gears.
I'm on stock wheels tire size right now, but hopefully not for long. I don't think 4.10 will be enough, and 4.56 may be a little too much.
Right, for 4.30s I saw:Also USA GEAR and Richmond
Too many choices...