'13 GT500 parts that will retrofit to any '07-'12...

backinastang

New Member
Established Member
Joined
Jan 22, 2012
Messages
243
Location
Round Rock, Tx
I might be in the minority but I like the 10-12 grill and rear lights better. Now the 5.8, TVS 2.3, 6p Brembos are freaking nice. Hoping to do start with the TVS upgrade.
 

04svtsnke

Well-Known Member
Established Member
Joined
Jul 6, 2009
Messages
2,154
Location
Winston Salem
I might be in the minority but I like the 10-12 grill and rear lights better. Now the 5.8, TVS 2.3, 6p Brembos are freaking nice. Hoping to do start with the TVS upgrade.

I would have to agree that you are in the minority. I give ford props because they made the grills as efficient as possible for airflow while still making them look straight sinister from the front. Of course all the other goodies are a plus ;)
 

BlueStarIV

Member
Established Member
Joined
Jul 17, 2007
Messages
91
Location
Pennsylvania
The day I installed it hit 99. so I did it at roughly 3am because I couldn't look at the boxes any longer :beer: Where in PA are you?
I hear you about looking at the boxes...lol. I'm over on the west side of PA...we ran into each other on another forum about a month ago under different names.
 
Last edited:

Tob

Salut!
Super Moderator
Joined
Mar 17, 2009
Messages
12,254
Location
The Ville
Just noticed the following FRPP addition this morning (7/22/12)...

2013GT500oilpan.jpg


M-6675-MSVT.jpg


5.4L/5.8L 4V MODULAR HIGH CAPACITY OIL PAN | Part Details for M-6675-MSVT* | Ford Racing Performance Parts

Steve, if you see this, can you quote a price on this one?

Also new is the brake backing plate from the 2013 GT500. In essence, Ford eliminated the dustshields from the front brakes, but kept a tiny portion of it in order to protect the dust boot/tie rod end from excessive heat. You can see it in the following photo next to the tie rod end as it has a sticker affixed to it.

2013GT500brakenbackingplate1.jpg


2013GT500brakebackingplate.jpg


2013 MUSTANG SHELBY GT500 BRAKE BACKING PLATE | Part Details for M-2005-MSVT* | Ford Racing Performance Parts

Keep the parts coming, FRPP. Good job!
 

evasive

Pro 2A Attorney
Established Member
Premium Member
Party Liquor Posse
Joined
Aug 3, 2008
Messages
3,863
Location
FL
Motor have to come out for the oil pan to be replaced?
 

500_man

Member
Established Member
Joined
Nov 4, 2011
Messages
198
Location
NH
I might be in the minority but I like the 10-12 grill and rear lights better. Now the 5.8, TVS 2.3, 6p Brembos are freaking nice. Hoping to do start with the TVS upgrade.

I agree with you - I prefer the finished look of the existing grill and the taillights don't excite me either. :shrug:
 

black99lightnin

move along
Established Member
Joined
Sep 7, 2004
Messages
13,089
Location
Louisiana
2013 base wheels. Saw some on ebay for $3500:uh oh:. I like them not just to the tune of $3500. Hopefully FRPP will get them and sell the set for $1500ish? I got my 2010 base rims through bfr for $599 for the set.
 

Tob

Salut!
Super Moderator
Joined
Mar 17, 2009
Messages
12,254
Location
The Ville
You purchased the 18" ragtop wheels - Ford parts needed to dump their stock. You won't see the forged 19"/20" wheels for a price anywhere near that for '13.
 

black99lightnin

move along
Established Member
Joined
Sep 7, 2004
Messages
13,089
Location
Louisiana
You purchased the 18" ragtop wheels - Ford parts needed to dump their stock. You won't see the forged 19"/20" wheels for a price anywhere near that for '13.

yep, they were damn cheap. I've seen 2011-12 PP wheels for $400 each. So if the 2013 base rims come in at that price or less......
 

FORDSVTPARTS

Authorized Vendor
Joined
Sep 8, 2004
Messages
8,908
Location
MINNESOTA
The price on the TVS finally went up.

As of August 1st it's $2420.00, plenum stayed the same.

Anyone that had their order placed by July 31st is locked in at the lower price.

-Steve
 

athlon551

Member
Established Member
Joined
Jun 1, 2012
Messages
95
Location
Columbus, Ohio
:coolman:Man am I glad I order it on the 31st......Finally made a good decision!

Thanks Steve


...Now just have to wait out the elbow backorder.
 

evasive

Pro 2A Attorney
Established Member
Premium Member
Party Liquor Posse
Joined
Aug 3, 2008
Messages
3,863
Location
FL
Just an FYI on the M-6675-MSVT pan.

Our regular price on it is $176.00 plus shipping :beer:


M-6675-MSVT.gif



-Steve

That is tempting. Anyone know around about how much a shop would charge to install?
 

Users who are viewing this thread



Top