What's with all the posts being deleted? Somebody said too much? If it's a grudge car why was this even posted up?
Eaton 6 speed Cobra 10.10 @ 139mph
- Thread starter K_Hill
- Start date
Sorry. Not possible to run this at 3,500 lbs on an Eaton without nitrous. Your friend is not being honest with you.
Haha believe what you want. You can look it up and down and won't find a kit. You live in Nashville, which is pretty close. Maybe we can go to a local track sometime. Next time we are at the track all make a nice video of it.
I have a feeling that IronTerp has been around enough to know what he is talking about. He has run the quickest/fastest eaton list for years. Knows what it takes to hit those numbers based on weight and power. No need to get cocky about it. You have to realize that running those times and trap speeds at that weight with an eaton hasn't been done. Not even close. If it was 400lbs lighter, then we have seen that. Just saying. Either way, that's an impressive car :beer:
Believe what you want, the owner of this car builds cobras for a living and knows them like the back pf his hand. All I can say is this car is a freak of nature..
Of*
I would enjoy coming out and watching him run. Love Eaton powered Terminators and Shelbys!
The inconsistency here is the trap speed. At a 3,500 lb race weight and the power capability of an Eaton powered 4.6 liter setup without nitrous, 139 MPH is highly unlikely. Especially so with the picture provided of the engine bay.
Below is the all time MPH list. Joe and Jake, the number 1 and 2 on the list, are running very well setup cars with very low race weights, near maximized Eaton power levels, and great drag race suspensions setups. On the flip side, 4 fellas have run 139+ with nitrous powered Eaton setups.
EATON TERMINATOR 1/4 MILE 130 MPH CLUB (Non-nitrous)
1) iBiTe03.......................138.76 (4spd/SRA)
2) BADASS03SVT.............135.99 (Auto/SRA)
3) CobraStruck................132.93 (6spd/IRS)
4) F8LSNAKE...................132.00 (6spd/SRA)
5) trey193......................131.60 (6spd/IRS)
6) Rice Eatr....................131.18 (6spd/SRA)
7) Posi...........................131.19 (Auto/SRA)
7) Soap..........................130.80 (6spd/SRA)
8) Posi...........................130.68 (6spd/SRA) (Vert!)
9) Stinkapuss..................130.62 (6spd/IRS)
10) Metalhead131............130.47 (6spd/SRA) (Upper pulley only)
11) IronTerp....................130.45 (6spd/IRS)
12) sonic03snake.............130.35 (6spd/SRA)
13) Almo.........................130.34 (6spd/SRA) (non-ported!)
14) F8LSNAKE..................130.14 (6spd/IRS) (non-ported!)
Last edited:
I am the owner of the cobra.. That picture is not acurate the car has 60lb injectors in it and the weight is fudged a little. I really wasnt wanting anythnig about the car posted but its cool I can answer any questions you may have. I am new to posting on here but not new to reading the threads.
Is it a stock long block? I've always wondered what a high compression/Eaton combo would do. I'm like the rest of the guys in my opinion. If its just a ported eaton on stock long block it is very hard to believe.
http://www.svtperformance.com/forum...1-terminator-vs-gt500-shootout-roll-call.html
^
We all need more details on this car if these times are going to be considered to be legitimate.
^
We all need more details on this car if these times are going to be considered to be legitimate.
I think that I need to get a copy of my timeslips to you. I hit 130.xx in March of this year. Waiting for some better air to try and hit that again :beer:
Lots of questions are posted, I'm sure the owner can answer those.
I agree though, Joes car weighed 3060 with driver and made 565whp with cams and had a 4 speed and it went 138. So something isn't adding up
I'll be at BG for the finals.....bring it out.
I agree though, Joes car weighed 3060 with driver and made 565whp with cams and had a 4 speed and it went 138. So something isn't adding up
I'll be at BG for the finals.....bring it out.
theres a 2v lightning 5.4 with higher compression than stock and heads and cams on a eaton making 535 rwhp
so, I imagine a cam, higher compression eaton cobra could make 600
Someone I know just did that exact thing. Higher comp and GT cams. Made 570 on an eaton at 16-17 psi
No it is not a stock long block teksid block 20 over factory rods and crank. Will not disclose pistons. It has stock cams unported heads the eaton has been ported with a 2.76 upper and a 4lb lower. The car also has kooks long tubes with a steeda cat back,SRA of course. The car weighs 3300 and I weigh 150.
So this is probably a higher compression build?
this whole thread should just be deleted.
some guy posting about someone else's car and the owner not wanting to disclose info, which is fine, but makes this thread useless.
some guy posting about someone else's car and the owner not wanting to disclose info, which is fine, but makes this thread useless.
Im not out to set any records or break any records nor do I even care about them. I built the car to have fun with.
How does that make it pointless, I posted up a video and everything. I thought this was a forum to show others your track times. Once again its a grudge car, why would he give up all his secrets. Lol He just gave some details on the car, I mean what else is there to know. Its just a good running car, with a lot of attention put into it.
Users who are viewing this thread
