What's with all the posts being deleted? Somebody said too much? If it's a grudge car why was this even posted up?
Sorry. Not possible to run this at 3,500 lbs on an Eaton without nitrous. Your friend is not being honest with you.No nitrous.. His old setup from last year had nitrous. Not this one.
Haha believe what you want. You can look it up and down and won't find a kit. You live in Nashville, which is pretty close. Maybe we can go to a local track sometime. Next time we are at the track all make a nice video of it.
I would enjoy coming out and watching him run. Love Eaton powered Terminators and Shelbys!Haha believe what you want. You can look it up and down and won't find a kit. You live in Nashville, which is pretty close. Maybe we can go to a local track sometime. Next time we are at the track all make a nice video of it.
I would enjoy coming out and watching him run. Love Eaton powered Terminators and Shelbys!
The inconsistency here is the trap speed. At a 3,500 lb race weight and the power capability of an Eaton powered 4.6 liter setup without nitrous, 139 MPH is highly unlikely. Especially so with the picture provided of the engine bay.
Below is the all time MPH list. Joe and Jake, the number 1 and 2 on the list, are running very well setup cars with very low race weights, near maximized Eaton power levels, and great drag race suspensions setups. On the flip side, 4 fellas have run 139+ with nitrous powered Eaton setups.
EATON TERMINATOR 1/4 MILE 130 MPH CLUB (Non-nitrous)
1) iBiTe03.......................138.76 (4spd/SRA)
2) BADASS03SVT.............135.99 (Auto/SRA)
3) CobraStruck................132.93 (6spd/IRS)
4) F8LSNAKE...................132.00 (6spd/SRA)
5) trey193......................131.60 (6spd/IRS)
6) Rice Eatr....................131.18 (6spd/SRA)
7) Posi...........................131.19 (Auto/SRA)
7) Soap..........................130.80 (6spd/SRA)
8) Posi...........................130.68 (6spd/SRA) (Vert!)
9) Stinkapuss..................130.62 (6spd/IRS)
10) Metalhead131............130.47 (6spd/SRA) (Upper pulley only)
11) IronTerp....................130.45 (6spd/IRS)
12) sonic03snake.............130.35 (6spd/SRA)
13) Almo.........................130.34 (6spd/SRA) (non-ported!)
14) F8LSNAKE..................130.14 (6spd/IRS) (non-ported!)
Is it a stock long block? I've always wondered what a high compression/Eaton combo would do. I'm like the rest of the guys in my opinion. If its just a ported eaton on stock long block it is very hard to believe.
theres a 2v lightning 5.4 with higher compression than stock and heads and cams on a eaton making 535 rwhp
so, I imagine a cam, higher compression eaton cobra could make 600
Im not out to set any records or break any records nor do I even care about them. I built the car to have fun with.