Separate names with a comma.
Discussion in 'Driveline/Suspension' started by Sublime302, Sep 27, 2012.
Finally install my BMR springs and LOVE IT !!!!
Here is mine on BMR Lowering Springs
Are your wheels 19's or 20's?
pay no mind to the lack of muffler ...
Koni Yellow, Pro Kit, gt500 Strut mounts, BGF 275/40 on Boss wheels
H&R race springs
The setup above is the following:
- BMR Sport springs and Koni Yellows
- BMR Adj. PHB
- BMR Relos and LCAs
- BMR Adj UCA and Mount
- 20x9.5 +35mm with 275/35/20 All Around
Then I put on a set of 305 Drag Radials and needed more clearance (Pic Above)
Same as original, but swapped the rear springs for '13 CobraJet Springs. Now she launches hard and still has that mean stance I was after. I'm happy with the outcome. All she needs now is some Viking Double adjustable shocks in the rear!
Any rubbing on bumps??
BFG KDW2 255/35/19 front
Hoping it settles a little more,any idea how long it takes for them to settle?
No rubbing on bumps for normal daily driving or going in and out of the steepest of driveways
Only time it has ever rubbed was going on a road trip with the gf (fully loaded down with her luggage lol) and there was construction on the highway, so there were sections of the concrete surface cut out and ground down with probably a 4 or 5 inch step down, and then a step back up with temporary asphalt ramps in place. It was worse on the drops down, but still only for a split second did it rub and it didn't mark the tire on the outside sidewall, must've rubbed the inner fender on the dip down.
What tires are those RBCA S197?
Lowered with BMR springs
Here's mine on 20X9 and 20X10.5 Vossen CV3-R's. Currently on Eibach pros and thinking of going to BMR's.
19x10 +42 CF10s
+3mm front spacer
BMR drag springs.