Im looking for a set of the Weld Alumastar Front runners. The Black ones 17x4.5.
The part number on these 788B-1704204. Id like to buy a good used set. If you have a set let me know.
I need to update my picture. But I cant remember how to do it. Can anyone post the instruction link for that. I cant find it. Its been a while since I have been on.
I hate to dig up something old.
I finally lowered my car. I used the H&R Race springs. When I hit a small bump I can hear violent noise, even worse on larger bumps.
I have upper and lower ISO's in. I have checked the rear springs and they seam to be in the propper location and the shock seams...
So I have been reading and researching. But I just have not been able to decide. Non return vs return. Triple hat or dual.
I have been leaning on the triple and running two pumps in a return style. But just can't get out of my head that dual GT pumps would do and be easier. I'm looking to...
I have been doing some searching and have yet to decide which one I want to use. So maybe you guys can help.
Im going to start ordering mods for my up coming 2.9 whipple upgrade. I know I will be using 80's. Not sure on return or non return yet. So i figure Id go ahead with the throttle body...
I have the FTBR front and rear diff mounts. I have the thinker one on the bottom and 5 spacers per side.
What is the optimum number of spacers?(how many did you use?)
What is the optimum pinion angle?
I cant find the degree anywhere. I might be over looking it. Im about to check my...
Yes I did a search.
Here is whats going on. I polished a new Bassani cat back. When I pulled off my magnaflow, I saw my diff was leaking more than I had thought. I would only get a few drops when I parked it. Well after looking at the magnaflow the fluid that was leaking was running on top of...
I used the search, but must not have used the right combo of words.
I resealed my Diff. Gonna let it sit for a while. Im wanting to use royal purple. The only problem is most everyone has 85-140 synthetic fluid on the shelf. The tag on the Diff calls for 75-140 synthetic.
Would it be ok to...
I have used my tool before and have had very good luck with it. I used to install and remove hubs. With no problem.
Today I went to pull a hub, and the little adapter for the puller will not fit between the hub and snout. This is on my car. Never had a problem like this before. The hub is...
Looking for an LPW cover. Does anyone have one they where going to use but didn't. That they want to sell?
I know lpw has them, but is there a place that any knows of that may have them cheaper. Like a sale or clearence.
Have the pumpkin out for reseal, and thinking of replacing my black...
I pulled my Magnaflow CB to replace it a Bassani CB. When I first installed the magnaflow cat back it was fine. I then put me bassani X pipe on and noticed the x pipe hung low.
So the question is are /or have any of you guys seen this?
And what is the Fix?
I want to lower the car, But...
I have decided to sell my Stage III. I bought this from a friend/co worker of mine. He went the whipple route. I couldnt pass it up, an impulse buy. I made plans to install it but, cant see putting it on for just year. (Have almost all the money for a whipple) Its in good condition. He put down...
Ok guys I have did a search and I guess Im not using the right combo of word's.
I have a line on a local guy who has one. Hes putting the car back to stock. Or up grading didnt really ask.
When my car was tuned last, the tunner told me the the duty on the pumps were already high, and the...
Long story, but ill try to make it short. I took off to Houston for a 3 day get away. Before I took off I decided to hide the keys to my cobra.(both sets) I tossed them in a bin where I thought no one would look. Well when My mother inlaw came in to feed the dog, she decided to clean up some...
Ok guy I know there have been alot of dead battery threads lately. But mine bit the dust today. So I guess my question is, What is everyone using for a replacement. I want to use a redtop but I dont know if it will fit in the factory location.
I did a search but I guess Iused the wrong words.
So Im getting the coupe back on the road. Its been sitting since 06 and I havent touched it since I bought my 03 cobra in 2007.
I have been a member on here for a while, but never post much. I see alot of good info on here so I thought Id ask u you guys for your thoughts and input on tires...
Well I just had a new clutch put in last week and it has been fine. Pedal effort was smooth.
Moving on to today I went to install the Fiore FW adjuster and quadrant. Got three of the four bolts in. Thought I was doing good. After every thing was in I started to adjust every thing and had no...
I have a guy that going to tune my cobra for the 2.76. I also have a port TB and PL, but I dont think my gaskets will come in by the time he tunes it.
Should I wait to have it tuned after the TB/PL are on?
Or Can he tune it and then Put them on at a later date?
For u guys that have done...
Well guys Im finally getting my coupe back togeather. The motor is being built right now. The cars going to need paint. So I going to start with the engine bay while the motor is out. The car is blue, you know that 89 blue that peals off.
I going with Sonic Blue. So can any of you with a...
Its time to put a new clutch in. And before u ya say it, I searched.
I thinking of going with SPEC stage 2+ or a Stage 3. Not so sure wich one to go with being the car only put down 450 RWT. What do you guys think?
The stage 2+
The Stage 2+ clutch offers stage 2 feel for good daily...
I have a set of aluminum heads. I bought them bare because the springs where only rated for up to .550 lift. The problem is the OD that they would come with is 1.450, and the ones I have are 1.430 OD which are are the ones that comp cams spec out for the cam.
Should I be worried or install...
I have a welded and ported TB and PL. Painted with a High temp, Low gloss engine Paint. I had intentions of using this on my car, With the stock blower but decided not use it. This is a good item for someone that want to keep the stock one.
The PL was stripped with aircfaft stripper and...
I have a Stage III eaton ported by stiegmeier. It has a 2.8 pulley. Its a metco. Its a ring and hub type pulley.
The port# is 93105. this thing has been sitting for a while, I had intentions to paint it (it need paint)and put it on, but I just dont have the time to mess with it right now...
Just thought Id ask if any has a good tail pipe for a magnaflow system.(Rt hand) Mine has a dent in the pipe and it driving me crazy. Maybe someone has a sytem with left side damage where the would want to sell the right.