Search results

Wheels and tires, tires are all nt05r for some reason, I got them in a trade this way, 2 need replaced, well honestly you'll probably just have to get all new tires, I can have them taken off if wanted, right now theyre 315s and 275s. All 4 wheels are 20x10.5s with 25mm offset, 5x4.5/114.3. All...

Mostly looking for another stock one for a temporary fix so I can get the car home and still drive it on nice weather days while they're still around. 01-04 trans. Unless someone has a fairly cheap 26 spline they'd sell me?? Then I'll see what I can do, will definitely be buying a 26 beginning...

Prices don't include shipping, have pictures of most of everything. Photobucket: Stuff For Sale Photos by etk31708 | Photobucket Parts are mostly off my 02 and 03 gt: Stock tail lights that were tinted way too dark for my liking $40 Red radio bezel $30 4.6/5.4 Moroso aluminum oil...

I am trying to figure out which one right now, on a low budget. I can't afford a whole kit at this time and definitely can't afford a MM k and need one right now, so was trying to decide between the upr chromoly k or the granatelli and use my stock arms with some spring perches and just buy...

Say I swap in a 2v 6.8 v10? Just for shi** and giggles to see how long it lasts with arp head studs and rod bolts and mls gaskets with a pt88 slapped in there :D I've got a possible good hookup on a cheap motor and havent seen this done much, hardly at all actually, so figure why not...

Is it safe/ok to put a trickflow/felpro mls gasket on my stock bore when the gasket bore is 92mm? Or does it have to be the correct bore size in order to run properly? Thanks for any help guys.

I've now had my 2nd plug blowout on me and tired of dealing with fixing it and just gonna upgrade. Just found a whole 2v for cheap so no need for heads now, but I'd like to get some good cams and valvetrain and arp head studs still depending on prices, lmk what ya have. The cams I need are...

My rear end has been acting up lately so I've got it in my head now that I will just put in a mini spool since its cheap and relatively strong and the next best option than going full spool or aftermarket locker since I still drive this car everyday and can deal with having the mini spool where...

Ok I am pulling my motor next weekend and since its probably the only time I have to have it out(its my daily driver but brother is gone to college so theres an extra car at home currently) I am going to go ahead and put in some arp head studs and some nice head gaskets. Now my problem is I...

All stock parts are off my 03 gt at about 90k miles but still in excellent shape, some aftermarket parts I dont need at this time anymore and anything else I end up finding tht I need gone, pm or comment in here, either way works. Prices dont include shipping/paypal fees. Pics on request...

Axles - sold Also have a 99/01 cobra 03/04 v6 hood. It had some damage on a corner but I have fixed it for the most part, it could use a layer or 2 of fiberglass to look perfect, I just am not a big body man and was fortunate to get it where it is now. The hoods in black primer but sanded in...

Axles - sold Also have a 99/01 cobra 03/04 v6 hood. It had some damage on a corner but I have fixed it for the most part, it could use a layer or 2 of fiberglass to look perfect, I just am not a big body man and was fortunate to get it where it is now. The hoods in black primer but sanded in...

Ok basic run down here: I have a 03 gt, 5 speed, jlt rai, accufab 75mm tb and plenum, 24lb injectors from an 01 cobra, 4.10 gear, longtubes and offroad x, egr delete, 92 octane tune. I have an sct x3 and basically no matter how long I let the car run to "get used to" the tune it keeps idling up...

Ok its pretty saddening actually that I just installed long tubes on my car and one of the welds already blew out a small hole right next to the flange on the cyl 2 pipe right when I started it. I guess that's what I get for buying cheapo flowtech headers, but its all I could afford currently...

Found a fpdm, still looking for a ford gt fuel pump and possibly some 2v fore fuel rails too, let me know what you have, thanks.

I just picked up a 99/01 cobra front bumper and realized now that the clips and plates on the sides that bolt to the fender are missing. I thought they looked funny but couldnt pin point why until I got home so now I am stuck with it I suppose. But is there any way to repair that? 2 of the 3...

Ok guys, I've never posted in this section before but I need some help! I have 24lb injectors off a 01 cobra with adapters on my car and have had them on for a couple months now. But for the last 3 wks or so my car has had a bad misfire on startup for a couple mins then goes away and sometimes...

Ok I need this stuff all sold. Parts mostly off of my 2003 mustang GT but also have a 99/01 cobra hood. Prices dont include shipping and things like the driveshaft and hood I will not ship, those 2 are local only unless someone wants to cover full shipping costs. All of the parts are: 99/01...

Ok I have a few things to sell, mostly off of my 2003 mustang GT. Prices dont include shipping and things like the driveshaft and hood I will not ship, those 2 are local only unless all shipping cost is covered. All of the parts are: 99/01 cobra hood - unpainted in primer, has small piece...

delete, sorry, logged in friends account

Like the title says need an 85mm maf calibrated for 24lb injectors and has the 6 prong EABCDF connector, thanks.

delete thread please, thanks

Ok I know how to measure backspacing and what not but what I dont quite understand is what does backspacing even do? what is a good amount of backspacing? I am just kind of lost on those main concepts :shrug: and I'm trying to figure it out because I am working on buying some 15x10 weld prostars...

Ok guys, I've never actually posted on here but a couple times more recently but have been hangin around on here for about 2 or 3 yrs now and finally picked up my first stang in July. Its a 2003 black GT 5 speed, tan leather interior, 93k on the clock, alpine head unit and infinity speakers...