Search results

I've got a 03 mach 1 with a built 5.4 4v and an eaton on top of it. My current trans is on its second set of syncros. The low end torque is too much for it. I was looking into either a 4r70w or 4r75w. I enjoy cruising on the weekends so overdrive is necessary. After i swap to an auto I will be...

I getting ready to put together a new engine. Thinking about trying the modmax forged H beam rods. Has anyone had experience with them yet?

I have a sniper special forces tuner. Decided to go with a different style asking 125$ plus the ride. Also have a sct xcal2(locked) im asking 35$ plus the ride.

I have a sniper special forces tuner. I had it updated to v3.0 and have not used it since. I am selling it because local tuner prefers sct. New they cost 350+shipping the box doesn't look the greatest. so i'd like 275 shipped. if you have any questions or want pics pm me or email me at...

Hi, I have a 5.4 with a blower from an 03 cobra installed on it. i only want to run 8-10 psi can you tell me which pulley i should order?

I had a buddy with a 1999 cobra. He's looking to go turbo but wants to keep it as much of a sleeper as he can. He wanted to do an air to air intercooler but paint it black. I suggested an air to water intercooler like some vortech kits come with so there is nothing to see. I was wondering what...

looking to finish little odds and ends before I hit the dyno. looking to buy throttle cable and p/s hose assembly for 03-04 cobra. let me know what you have.

So i thought i was done with my swap but found an oil/coolant leak from the oil cooler/adapter. Rather then replace it with a new one I wanted to do an oil filter relocation kit. I wanted to replace the oil cooler/warmer with maximum motorsports relocation kit but also wanted to replace the part...

I'm looking for an oil filter relocation kit for my 5.4 4v that i modified to accept the 03-04 blower. I saw the kit that relocates the oil filter but i do not see what it does with the lower radiator hose. does your kit do anything with the lower radiator hose since my stock oil cooler points...

Hi guys my name is mike. I'm trying to help a friend. He owns his own body shop and from time to time buys/rebuilds totaled cars. He got a 06 mustang gt and let it sit for close to 2 years but would start it and let it run from time to time. He finally got around to fixing the chassis and the...

I have a timing cover from my 03 mach 1. There is nothing wrong with it i replaced my 4.6 with a 5.4 so i'm trying to clean out the garage. I'm looking for 100$ shipped for it. pm me for pictures of it.

got these from a friend for doing work on his car. don't look like they've ever been installed. not sure on price so i'll say 112 shipped. pm me and i'll send you pics from my cell. thanks mike

Before i get yelled at my search button doesn't work i was just looking for wrong info. My fiance and I purchased a 03 lightning and i'm looking to purchase a 4 lb lower pulley, what all supporting mods do i need? It already has cai, dp heat exchanger, borla cat back, ftvb, and i have a line on...

I'm not sure what is happening but the threads are not updating for me, as i scroll thru the list of forums it shows the latest post being yesterday. Before that it shows what ever the last post was added. But if i click into the forum and go into the thread there are new posts up from as soon...

Once you own one svt product you want to own them all. As some of you know i have a 03 mach 1 i'm finishing swapping a 5.4 4v into my car with an eaton from an 03 cobra. But my fiance and i just couldn't take it any more, we brought home our newest family member, a 03 ford lightning, once i...

So my fiancee and i bought a lightning as her new toy/dd. Found the previous owner and talked to him got all the maintence records for the truck it was very well cared for, but with a dual pass heat exchanger with secondary fans i expected it to pull alot more then it did. So i hooked up my...

I'm new to the lightnings and my eaton swapped 5.4 4v isn't up and running yet. I tried using the search button but didn't come up with anything. My fiancee and i just purchased an almost all stock mint condition 03 lightning. The only mods are, cai, dual pass heat exchanger, 170 t-stat, and i...

i've heard of numerous lightning guys switching to the 4v heads, what do you guys use for the super charger pulley system? does your stock pulley bridge or do you modify the navigator timing cover to use a cobra pulley bridge? any help would be appreciated.

swapped for a 4.6 to a 5.4 in my mach so getting rid of everything laying around, sold everything else locally so all i have left is timing cover, and stock timing guides. im asking 110 shipped, pm me and i can send you pics(don't know how to post them)

i put this in this section because marauder owners seem to modify more parts to do the eaton swap then cobra guys, i have a 5.4 dohc in my mach 1, was originally going turbo but plans changed and now doing eaton swap. i already have my engine in the car. instead of pulling my timing cover off to...

I've been working on my 5.4 dohc swap and one of my main goals is to keep my stock hood. I lowered the engine in the bay but still had issues with the intake mani. i had the karkraft adapters welded to my intake manifold then had a machine shop modify where the injectors sit. It turned out...

i'm sure there are threads about this already, i'm just too lazy to look. I have a 03 mach, i'm just finishing the 5.4 swap. My fiancee and i test drove an 01 cobra last week and with how it handled i'm really tempted to swap to an IRS in the mach. so what are the pro's and cons of having the...

Okay here's the deal. I have a friend doing a 5.0 it a 4 cyl fox, he put a e303 cam and 1.6 roller rockers. he doesn't know what length push rod to use it's his first try at a 5.0 build. heads are gt40's and stock block, can someone help me out with the correct length of push rods he needs so he...

i have see some lightning owners talking about going 4v my question is what lower intake do you use?

has anyone thought about making a 03-04 eaton fit on a 5.4l 4v? i was thinking cut it widen it, then fit a 1/2 or 3/4 plate across it to mount the eaton to it. i know it will be make less boost because of the added space but a pulley will fix that. any thoughts or has anyone tried this? i want...