Recent content by makriluc

  1. makriluc

    Unfortunately another R.I.P.

    Lended the car to my son for the week-end (to which I have the outmost trust), but one of his friend took the car for a spin without asking him. From what I was told, he floored it in second and lost control of it. Before he had a chance to flea he got caught by the cops (so driver's licence...
  2. makriluc

    Ford Racing M-5300-B coil springs?

    Has anyone ever tested these on a Sn95 Cobra?
  3. makriluc

    SR Performance coil over kits

    As any one tried the SR Performance coil over kits from AM? How do you like it?
  4. makriluc

    Speedcal and odomter question.

    Speedcal and odometer question. Ok, is the speedo and odometer locked together? In other words, if I'm going at 60mph will the odometer register the right mileage? A little back ground. I live in Canada and bought my 96 Cobra from Florida in 2008. I had to install a speedcal as the PO...
  5. makriluc

    Shift light wiring question

    Hi guys. I intend to buy the Summit SUM-G2947 shift light and I'm wondering if I may connect the green wire to the tach signal in our dash cluster ? Here is the wiring of the shift light Here is a picture from Raptor Perfomance for the cluster pictures Thanks
  6. makriluc

    P1SC belt question

    Hey guys. So I've installed my P1SC last summer. This week I've decided to order the Procharger self contained drain line to be able to changed my oil in a more pleasant way than pouring oil all over the place. After removing the head unit I've notice this on the back on the unit Would...
  7. makriluc

    Those with centri in blow through mode, what's you BOV sound's like

    Hi guys, I installed a P1SC,FMIC, HPX MAF in blow through mode on my 96 Cobra. With this, I have a TialQ 50 BOV. Tune was completed by Don Lasota, I'm very satisfied with the feel of the car. The only annoying thing is the sound of the BOV. In town, the car sounds like a street cleaner...
  8. makriluc

    Any one with a stock 96-98 suspension?

    I would like to know what is the height on a level ground from the ground to the top part of the wheel well front and back? When I bought my 96 Cobra in 2008 it was already lowered with Steeda springs. But since that time I had to replace my O/R catless X pipe with one with cats (emission...
  9. makriluc

    Used underdrive pulleys worth something $$

    Would you say that these are worth anything? Was on my 96 4.6 4V before my P1-SC install.
  10. makriluc

    Muffler sound comparison -- for the quiet side

    I know, it's an unusual request. But at my age I like thing to be a littler toned down. My set-up right now is a P1-SC intercooled, UPR o/x with Hi-Flow cat linked to a Magnaflow cat-back 2.5" system. I want to keep the pipes, so I'm dealing with a small place to fit the new mufflers. Tha...
  11. makriluc

    Is your blow off valve partially open at idle?

    Mine is at idle under 20 hg of vacuum.
  12. makriluc

    I thought PMAS flange were standard?

    I really thought PMAS flange were standard. It looked so when looking at different site. No site ever mentioned any differences. Never mind, my bad. I didn't look close enough.
  13. makriluc

    Show me your PMAS location in a centri application for a 4.6 4v

    Ok guys. I've been tackling to resolve many issues I had with my Procharger install since last November. Today according to my tuner I was able to resolve my STFTs variance:rockon:. Now my next problem to resolve is my MAF count which are, according to my tuner, "the looks of a 9.0 earthquake...
  14. makriluc

    Trick on pin pointing a small exhaust leak?

    Ok guys. I'm still in the tuning process with my remote tuner. We're getting there bits by bits. Now, my STFTs are getting better but still to much appart for my tuner's liking. He says that, 99% of this problem is caused by a small exhaust leak ahead of the front O2 sensors. I got the car...
  15. makriluc

    Question on dataloging for STFT

    Hi Guys. What would cause, while dataloging, my Short Term Fuel Trim to be nil. I have a flatline (data is at 1.0) while my other data looks good. I'm in the process of tuning after a P1SC install. When I dataloged my data to my tuner two months ago, my bank 2 was going lean in the STFT. My...

Top