Search results

I've hardly driven the car this year, and I would rather someone else enjoy the car at this point, so I'm selling. I have been fairly meticulous about note taking on this car since I have owned it. I have a 15 page document that lists date and mileage for every time that I worked on the car from...

I'm in St. Louis and am looking at a car (subaru) that I found on the internet located in Boardman, OH. I'm hoping to find someone in the area that would be willing to go by and test drive the car for me before I just trust everything the sales guy tells me and I purchase a plane ticket to come...

So, I did my first PDX this summer and wasn't able to make it to more this year, but am definitely going to make some more next year :). But I'm looking at improving my brakes this winter. ---The Backstory--- Perhaps it was just my noobness and I was riding the brakes too much that first...

This weekend will be my second autocross. The first time out I wasn't worried to much about the setup of my suspension...just learning about the event itself and having a good time. This time around I want to mess with the suspension and dial the car in a little. You can see the mods below...

I installed my panhard bar earlier this year and noticed the rear axle wasn't centered under the body at that time. With 275 width wheels it was noticeable to me, but it wasn't super visible. I went to Kuhmo Ecsta XS 295 wide wheels (which seem to run wider than other 295 tires) and the...

So, I've been thinking about adding an oil cooler to my setup to help cooling, but I really don't need it under normal driving conditions. I have a battery relocation, so I was thinking about putting it behind the driver's side head light and then remove the head light on open track days. If...

Well, I did my first PDX last week. It was a blast! It feels good to push the car and get more out of it than I ever could on the street. I'm sure most of you guys know all of this, but I'm excited so I had to post a couple of take aways and questions. 1. Ride with more people. My greatest...

Forgive me if this has been discussed before. I did a Google search for site:performance.com Evans npg" and found a little bit but I still have questions. I am heavily leaning toward using this stuff...but want to do it right. 1. The biggest question is about driving in cold weather. The...

My intake has the IAT1 sitting there, but it is unused because I'm using the 96 computer with my swap. So the IAT2 sensor on the motor is wired to the IAT1. I want to be able to datalog the IAT1 though, using analog input on the SCT. I need to know the characterization of the sensor though...

My car had a motoblue quick change upper on it when I bought it. It has a 2.76 upper, but I can't find any other pulleys available. The steeda pulleys look similar though. Can someone measure the inner diameter of their steeda, and the diameter of the 5 bolts that hold the pulley to the hub...

I picked up some RPF1 wheels WAY to cheap to pass up...but the fronts are only 17x8.5. A tire size calculator says probably the best size is 245, but I'd like to run 255 if I can. I autocross a couple of times a year when I have time to make it to an event, and will be doing my first HPDE...

I'm thinking about mounting a black plastic plate above my mirror and mounting a few things such as a sub controller and possibly some other items up there. I don't want to just screw into the headliner because it might cause it to sag, so I'm hoping someone has a picture of the headliner...

I'm working on polishing a Dragon Plenum, and I'm trying to figure out how to sand down the cast aluminum in between the letters on it. I've been working the whole thing over and the rest of it is down to wet sanding with 400 grit now and is starting to look good...but I'm not sure what to do...

This episode is just over a year old, but new on netflix and I was watching it the other night and noticed TXPD's car on the show. So maybe this is a repost, a quick search didn't find it...so I thought I would post it up. He's at 8:20 on Segment 3 of this show here: Top Gear Season 15 Episode...

I'm looking at getting a road race oil pan for my car, and am wondering if anyone is using this pan on their car: Amazon.com: Moroso 20548 Oil Pan for Ford 4.6/5.4 Engines (Road Race Applications): Automotive Mostly concerned about this one line from the description on that page: "Will Not...

I've done a little reading and searching and haven't found a thread on SVTP dedicated to this issue, and information I see on the internet in general about polished aluminum seems conflicting. I'm considering polishing my eaton, but some things I've read says that aluminum gets a 1 molecule...

Driving out there for a ski vacation in January, and I found basic definitions of what I need, but I can't figure out if I need to purchase chains for 2 or all 4 of my wheels on the 2WD Suburban I'll be driving. Can anyone tell me how many chains I need?

So I was able to pick up a full Maximum Motorsports suspension for really cheap a few months ago and have started the process of installing it. The K member, non-offset front control arms, 03/04 cobra strut tower brace, HD torque arm, panhard bar, koni yellow coil overs on the front and koni...

Background: I can't use the search function on this website for 3 letter words such as "oil" and "pan", and searching "site:svtperformance.com oil pan" or other variants provides way too many results, mostly build threads. I also flipped through the first 5 pages of this forum hope to stumble...

So I have a few questions around the AMSoil Dual Bypass filtration system. Here is some quick starter information on it. AMSOIL - By-pass Oil Filter Mounting Kits - specifically looking at the BMK23 Demonstration of it: Amazing Filter Demonstration - Save Your Engine - YouTube...

Adding an MM K-member this winter and need to get an oil filter relocation kit. I was considering a large upgrade in this area with a new inlet adapter, oil radiator, and more, but I'm deciding to scale it back to just a relocation kit. I'm currently eyeing the Trans-Dapt 1227 dual filter...

I've got an eaton that I'm planning on sending up to Posi soon, and if I can get a decent deal on a Dragon setup to send up with it and have a port match done, I'd like to do that. If someone has one they need to get rid of, send me a PM.

I'm looking for a Maximum Motorsports strut tower brace for use on an 03/04 cobra, part number MMSTB-7. PM me if you have one you want to sell.

I have the complete set of lines from a '96 cobra. I believe these will work on any 4.6L (DOHC or SOHC) from 1996-1998. - SOLD I also have the complete set of lines that came from an 01 Bullitt, having just replaced the lines on my 03 cobra motor, I know that these are identical to the 03 cobra...

I have a problem with my key system (forgive my ignorance with the proper technical terms) where it basically thinks the key is still in it. Car does not start, but I can turn it on to accessory mode without the key in it and checking the amp usage with a meter hours after the car has been...